DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
Product Specifications
■
No. of Contacts 16 AWG 18 AWG 20 AWG 22 AWG Operating temperature range -40 to 105ç(Note 2)
1
2
3
4
5
6
2
15A 13A 11A
14A 12A 10A
9A
8A
7A
6A
6A
6A
Operating humidity range
Storage temperature range
Storage humidity range
UL/TÜVꢀFile No. and Recognition No.
ULꢀꢀꢀ:E52653
C-ULꢀꢀ: E52653
TÜVꢀꢀ:R50318850
20 to 80%(Note 3)
-10 to 60ç(Note 4)
40 to 70%(Note 4)
12A 10A
8A
7A
7A
7A
10A
10A
10A
8A
8A
8A
Current Rating
Ratings
15A 13A 11A
12A 11A 9A
9A
8A
(7.92mm pitch)
3
(7.92mm pitch)
Specification
Voltage Rating UL,C-UL
TÜV
AC/DC 630V
AC/DC 600V
AC/DC 300V
Item
Specifications
Conditions
1. Insulation
Resistance
2. Withstand
Voltage
3. Contact
Resistance
No less than 1,000Mø
No flashover or breakdown
No more than 10mø
Measured at DC 500V
AC 1,500V is applied for one minute.
Measured at 1mA and no higher than 20mV
4. Vibration
Resistance
5. Shock
Resistance
Frequency 10-55 Hz, half amplitude 0.75
mm, 10 times in each of the three directions
No electrical discontinuity of 1 µs or greater
No electrical discontinuity of 1 µs or greater
Accelerated velocity : 490 m/s2 for 11 ms, half-sine
wave in 3 directions, 3 times for each direction
6. Moisture-
resistance
Contact resistance : no more than 20mø
Insulation resistance : no less than 500Mø
Temperature : 40 2ç ; humidity : 90 to 95%,
left as it is for 96 hours
7. Temperature
cycles
Contact resistance : no more than 20mø
Insulation resistance : no less than 1,000Mø
-55ç : 30 minutes
5 cycles
85ç : 30 minutes
→
Tin plated : 30 mating cycles,
Gold plated : 50 mating cycles
8. Durability
Contact resistance : no more than 20mø
Flow : 260ç, 10 sec
Hand soldering : temperature of soldering
iron at 350ç 10ç for 5 seconds
9. Solder heat
resistance
The resin parts should withstand the temperature and
resist melting.
Note 1:This is the maximum current rating while all pins are powered or used as all power lines.
Note 2
:
Includes temperature rise caused by current flow.
Note 3
Note 4
:Use without condensation on parts.
:
The storage condition refers to long-term storage of the product on the shelf before assembly. Please use the operating
temperature for temporary storage such as pre-assembly and during shipping.
Materials / Finish
■
Component
Part
Material
PBT (glass-reinforced)
Brass
Finish
Black or White
Tin plated or Gold plated
UL Specification
UL94V-0
-
Insulator
Contact
Header
Crimp socket
In-line plug
Crimp contact
Insulator
Contact
PBT (glass-reinforced)
Copper alloy
Black or White
UL94V-0
Tin plated or Gold plated
-
Product Number Structure
■
●Connector
DF 63 # * P 3.96 DSA
-
-
❶
❷
❸
❹
❺
❻
❼
●Crimp contact
DF 63 1618 SCF
-
❽
❾
❽Applicable Conductor
1618 : 16 to 18 AWG
2022 : 20 to 22 AWG
❶Series name : DF
❷Series No. : 63
❹Number of Contacts : 1,2,3,4,5,6
❸Form Type
❺Connector type
❾Packaging
Header
P
S
: Header
SCF : Socket contacts·Reel·Tin plated
SCFA : Socket contacts·Reel·Gold plated
Blank : Black
: Crimp socket
EP : In-line plug
A
R
: Without guide post
SC
: Socket contacts·Pack·Tin plated
:
Guide post·Guide Key Type, white
❻Contact Pitch : 3.96mm
SCA : Socket contacts·Pack·Gold plated
PCF : In-line plug contacts·Reel·Tin plated
PCFA : In-line plug contacts·Reel·Gold plated
Sockets
7.92mm
Blank : Black
❼Type of housing
R
: Guide Key Type, white
PC
: In-line plug contacts·Pack·Tin plated
DSA : Straight header
DS : Right angle header
In-line Plugs
PCA : In-line plug contacts·Pack·Gold plated
Blank : Panel Lock Type
C
: Crimp housing
A
: Without Panel Lock
2