The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HNC Series●2.5mm Pitch Connector for Discrete Wire Connection
■Product Specifications
AWG 22 : 3A
)
)
-25 to +85ç (
-40 to 80%
Note2
Operating Temperature Range
Operating Moisture Range
AWG 24 : 3A
AWG 26 : 2A
AWG 28 : 1A
AWG 30 : 0.5A
250V AC
Current rating
(Note1)
Rating
-10 to +60ç (
Note3
Storage Temperature Range
Storage Moisture Range
-40 to 70% (
)
Note3
Voltage rating
Item
1. Insulation Resistance 1000M ohms min.
2. Withstanding voltage No flashover or insulation breakdown.
3. Contact Resistance 10m ohms Max
4. Insertor/Extraction Force 0.4N (40gf) min.,4.4N (450gf) max.
5. Vibration No electrical discontinuity of 1μs or more
Specification
Condition
500V DC
1000V AC/1 minute
1A
Measure at the square steel pin of 0.635 0.002mm
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 10m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 40 2ç and humidity of 90% to 95%
(-25ç: 30 minutes ➝ 5 to 35ç: 10 minutes
7. Temperature Cycle
Contact resistance: 10m ohms max:Insulation resistance: 1000M ohms min.
(-85ç: 30 minutes ➝ 5 to 35ç: 10 minutes) 5 cycles
Tin plating : 30 cycles
8. Durability (Mating/un-mating) Contact resistance: 20m ohms max.
Gold plating : 50 cycles
Flow: 250ç for 5 seconds
9. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 2 seconds
Note 1: The rated current will be changed according to cable sizes for use. The header rating only t is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications
for a specific part number shown.
■Material
Product
Crimping Socket
Contact
Part
Material
Polyamide
Phosphor Bronze
Polyamide
Brass
Finish
Black
Remarks
UL94V-2
–––––
UL94V-2
–––––
Insulator
Contact
Insulator
Contact
Tin plated or gold plated
Black
Tin plated or gold plated
Pin Header
■Ordering Information
●Crimping Plug
HNC 2
- 2.5 P - * DSL
q
w
e
r
t
y
q Series Name
w Series No.
: HNC
: 2, 1
t
y
Number of Contacts : 2 to 8,10,12,15
Contact Type
e Contact Pitch
r Connector Type
S : Socket
: 2.5mm
None : Crimping socket
DS
: Straight
DSL : Right angle
P : Pin Header
●Contact
HNC
- 2.5S - C - A
q
w
e
e
q Type: 2.5mm pitch socket
w Packaging Type
Applicable cable size
A
B
: AWG22 to 26
: AWG26 to 30
C
D
: Reel
: Bag
B170