HMC703LP4E
v00.0311
8 GHZ FRACTIONAL SYNTHESIZER
Table 2. Pin Descriptions
Pin Number
Function
Description
1
2
3
4
5
6
7
SCK
CMOS Input: Serial port clock
CMOS Input: Serial port data
SDI
DVDD
VDDIO
LD_SDO
TRIG
Power Supply for digital - Nominal 3.3 V MAX 25 mA, f
dependent
PD
Power Supply for Digital IO - 3.3 V, 8 mA MAX (only when driving LD_SDO)
CMOS Output: General Purpose Output - Lock Detect, Serial Data Out, others, Selectable
CMOS Input : External Trigger pin.
N/C
No Connect
8
VCCPS
Power Supply for RF Divider, Nominal 3.3 V 35 mA MAX
No Connect
9
N/C
10
VCOIP
Differential RF Inputs. Normally AC Coupled, 2 V DC bias generated internally. For Single Ended
operation, RFN must be AC coupled to the ground plane, typically 100 pF ceramic. DC Bias of 2.3 V is
generated internally
6
11
VCOIN
12
13
14
15
16
VCCHF
VDDLS
VPPCPA
CP
Power Supply for RF Buffer, Nominal 3.3 V, 6 mA MAX
Power Supply for PFD to CP Level Shifters, Nominal 5 V, 5 mA MAX, f
Power Supply for charge pump, Nominal 5 V, 10 mA MAX
Charge pump output
dependent.
PD
AVDD
Power supply for analog bias generation, Nominal 3.3 V, 2 mA MAX
External bypass decoupling for precision bias circuits, 1.920 V +/-2 mV
17
BIAS
NOTE: BIAS ref voltage cannot drive an external load. Must be measured with 10 GΩ meter such as
Agilent 34410A, normal 10 MΩ DVM will read erroneously.
18
19
20
RVDD
N/C
Power Supply for Reference path, Nominal 3.3 V. 15 mA MAX reference dependent
No Connect
XREFP
Reference Input. DC bias is generated internally. Normally AC coupled externally.
Power Supply for phase detector. Nominally 3.3 V. Decoupling for this supply is critical. 5 mA MAX, f
dependent
PD
21
VDDPD
22
23
24
N/C
CEN
SEN
No Connect
CMOS Input: Hardware Chip Enable
CMOS Input: Serial port latch enable
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
978-250-3343 978-250-3373 fax Order On-line at www.hittite.com
Application Support: pll@hittite.com
•
•
6 - 9