HT46R14
A/D Type 8-Bit OTP MCU
Technical Document
·
Tools Information
·
FAQs
·
Application Note
-
HA0004E HT48 & HT46 MCU UART Software Implementation Method
HA0005E Controlling the I2C bus with the HT48 & HT46 MCU Series
HA0011E HT48 & HT46 Keyboard Scan Program
-
-
-
-
HA0013E HT48 & HT46 LCM Interface Design
HA0102E Using the HT46R14 in a CCFL Lamp Inverter
Features
·
·
·
Operating voltage:
Supports PFD for sound generation
f
f
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
HALT function and wake-up feature reduce power
consumption
·
·
·
20 bidirectional I/O lines
·
Up to 0.5ms instruction cycle with 8MHz system clock
Two interrupt input shared with an I/O line
at VDD=5V
·
·
·
·
·
·
·
·
·
Two 8-bit programmable timer/event counter with
overflow interrupt and 7-stage prescaler
8-level subroutine nesting
8 channels 9-bit resolution A/D converter
Two comparators with interrupt function
Bit manipulation instruction
·
Two 8-bit programmable pulse generator (PPG) out-
put channels, with prescaler and 8-bit programmable
timer counter, and supports active low or active high
output
15-bit table read instruction
63 powerful instructions
·
·
·
·
On-chip crystal and RC oscillator
Watchdog Timer
All instructions in one or two machine cycles
Low voltage reset function
4096´15 program memory
192´8 data memory RAM
28-pin SKDIP/SOP package
General Description
The device are 8-bit, high performance, RISC architec-
ture microcontroller devices specifically designed for
A/D applications that interface directly to analog signals,
such as those from sensors.
and wake-up functions, enhance the versatility of these
devices to suit a wide range of A/D application possibili-
ties such as sensor signal processing, etc.
The device provides two comparators and programma-
ble pulse generator (PPG). It is particularly suitable for
use in products such as induction cooker and home ap-
pliances.
The advantages of low power consumption, I/O flexibil-
ity, programmable frequency divider, timer functions,
oscillator options, multi-channel A/D Converter, HALT
Rev. 1.00
1
November 1, 2005