GS9092A GenLINX® III 270Mb/s Serializer for SDI and DVB-ASI
Key Features
Description
•
SMPTE 259M-C compliant scrambling and NRZI to NRZ
encoding (with bypass)
The GS9092A is a 270Mb/s serializer with an internal FIFO
and an integrated cable driver. It contains all the necessary
blocks to realize a transmit solution for SD-SDI and
DVB-ASI applications.
•
•
•
DVB-ASI sync word insertion and 8b/10b encoding
Integrated Cable Driver
In addition to serializing the input data stream, the
GS9092A performs NRZI-to-NRZ encoding and scrambling
as per SMPTE 259M-C when operating in SMPTE mode.
When operating in DVB-ASI mode, the device will insert
K28.5 sync characters and 8b/10b encode the data prior to
serialization.
Integrated line-based FIFO for data alignment/delay,
clock phase interchange, DVB-ASI data packet
insertion, and ancillary data packet insertion
•
User selectable additional processing features
including:
ANC data checksum, and line number calculation
and insertion
Parallel data inputs are provided for 10-bit multiplexed
formats at SD signal rates. A 27MHz parallel clock input
signal is also required.
TRS and EDH packet generation and insertion
illegal code remapping
The integrated cable driver features an adjustable signal
swing and common mode operating point offering fully
compliant SMPTE 259M-C cable driver connectivity.
•
•
•
•
•
•
•
Enhanced Gennum Serial Peripheral Interface (GSPI)
JTAG test interface
+1.8V internal cable driver and core power supply
Optional +1.8V or +3.3V digital I/O power supply
Small footprint (8mm x 8mm)
The GS9092A includes a range of data processing functions
such as automatic standards detection and EDH support.
The device can also insert TRS signals, re-map illegal code
words, and generate and insert SMPTE 352M payload
identifier packets. All processing features are optional and
may be enabled/disabled via external control pin(s) and/or
host interface programming.
Low power operation (typically 200mW)
Pb-free and RoHS compliant
Applications
The GS9092A also incorporates a video line-based FIFO.
This FIFO may be used in four user-selectable modes to
carry out tasks such as data delay, clock phase interchange,
MPEG packet insertion and clock rate interchange, and
ancillary data packet insertion.
•
SMPTE 259M-C Serial Digital Interfaces
•
DVB-ASI Serial Digital Interfaces
The device may also be used as a low-latency
parallel-to-serial converter where the SMPTE scrambling
block will be the only processing feature enabled.
The GS9092A is Pb-free, and the encapsulation compound
does not contain halogenated flame retardant (RoHS
compliant).
GS9092A GenLINX® III 270Mb/s Serializer for SDI and
DVB-ASI
1 of 63
www.gennum.com
Data Sheet
34715 - 4
May 2010