• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C02E.pdf
Oct.1,2012
Explanation of Symbols in This Catalog
Lx W dimension: products of 0.6x0.3 mm or less
Voltage and temperature derating recommended product
This product is suitable when a voltage continuously applied
to a capacitor in an operating circuit, is used below (derated)
the rated voltage of the capacitor.
This model guarantees the test conditions in the endurance test,
at a rated voltage x 100% at the maximum operating temperature.
A reliability assurance level equivalent to a common product
can be secured, by using this product within the voltage and
temperature derated conditions recommended in the figure below.
Ultra-
Derating
compact
Low dissipation for high frequency
HiQ
By devising ceramic materials and electrode materials,
low dissipation is achieved in frequency bands of VHF,
UHF and microwave or beyond.
Low inductance
Low
ESL
This capacitor is designed so that
the parasitic inductance component (ESL)
that the capacitor has on the high frequency
side becomes lower.
s
Recommended Conditions of the Derating Operating Voltage and Temperature
120
100
125°C Type
105°C Type
Product suitable for acoustic noise reduction and low distortion
Anti-
80
noise This product suppresses acoustic noise,
which occurs when a ceramic capacitor is used,
by devising the materials and configuration.
85°C Type
60
40
Product resistant to deflection cracking
This capacitor is designed to prevent failures as much
as possible by short mode caused by cracking
when there is board deflection.
Deflecting
crack
20
0
0
25
50
75
100
125
150
Product Temperature (°C)
Product with solder cracking suppression
This capacitor is configured with metal terminals
and leads connected to the chip.
Soldering
crack
The metal terminals and leads relieve the stress from expansion
and contraction of the solder, to suppress solder cracking.
s
All the products in this catalog comply with EU RoHS.
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
EU RoHS
Compliant
s
For General Purpose GRM Series Capacitance Table