NO.
PQ28-122E
Page 4/4
FUZETEC TECHNOLOGY CO., LTD.
Product Specification and Approval Sheet
Version 9
R=FRVL075-120F
R
S T U
V
1000
100
10
S=FRVL100-120F
T=FRVL125-120F
U=FRVL135-120F
V=FRVL200-120F
1
0.1
0.01
0.1
1
10
100
Fault current (A)
7. Material Specification
Lead material: FRVL010-120F~FRVL017-120F Tin plated copper, 24 AWG.
FRVL020-120F~FRVL090-120F Tin plated copper, 22 AWG.
FRVL075-120F~FRVL375-120F Tin plated copper, 20 AWG.
Soldering characteristics:MIL-STD-202, Method 208E.
Insulating coating:Flame retardant epoxy, meets UL-94V-0 requirement
8. Part Numbering and Marking System
Part Numbering System
Part Marking System
F R V L □ □ □ ─ □ □ □
F
F
Fuzetec Logo
RVL □ □ F
RoHS Compliant / Lead Free
Voltage Rating
F
RVL10F
31AB
RoHS Compliant / Lead Free
Current Rating
Part Identification
Product Family
□
□ □ □
Example
Date Code/Lot Number
Note: Font on Marking may look slightly different due to fine turnings of each Marking printer.
Warning: - Each product should be carefully evaluated and tested for their suitability of application.
- Operation beyond the specified maximum rating or improper use may result in damage and possible electrical arcing
and/or flame.
- PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition
and/or prolonged trip are not anticipated.
- Avoid contact of PPTC device with chemical solvent, including some inert material such as silicone based oil,
lubricant and etc. Prolonged contact will damage the device performance.
- Additional protection mechanism are strongly recommended to be used in conjunction with the PPTC device for
protection against abnormal or failure conditions.
- Avoid use of PPTC device in a constrained space such as potting material, housing and containers where have
limited space to accommodate device thermal expansion and/or contraction.
NOTE : Specification subject to change without notice.
2014/9/19