fitipower integrated technology lnc.
Synchronous Buck PWM
DC-DC Controller
Description
Features
The FP6329/A is designed to drive two N-channel
MOSFETs in a synchronous rectified buck topology.
It provides the output adjustment, internal soft-start,
frequency compensation networks, monitoring and
protection functions into a single package.
● Operates from +5V or +12V
● High Output Current
● Drives Two Low Cost N-Channel MOSFETs
● Fast Transient Response
● Simple Single-Loop Control Design
( Voltage-Mode PWM Control)
● Internal Soft-Start
● Over-Current Protection
● Over-Voltage Protection
● Under-Voltage Protection
● SOP-8 Package
The FP6329/A operating at fixed 300/600kHz
frequency provide simple, single feedback loop,
voltage mode control with fast transient response.
The resulting PWM duty ratio ranges from 0-100%.
The FP6329/A features over current protection.
The output current is monitored by sensing the
voltage drop across the RDS-ON of the low side
MOSFET which eliminates the need for a current
sensing resistor.
● RoHS Compliant
Applications
● Motherboard
● Graphic Card
This device is available in SOP-8 package.
● Telecomm Equipments
● High Power DC-DC Regulators
● Switching Power Supply (SPS)
Pin Assignment
Ordering Information
FP6329□□□□
SO Package (SOP-8)
TR: Tape / Reel
8
7
6
5
1
2
PHASE
COMP/SD
FB
BOOT
UGATE
G: Green
3
4
GND
Package Type
SO: SOP-8
VCC
LGATE/OCSET
SP: SOP-8(Exposed Pad)
Switching Frequency
Blank: 300 kHz
A: 600 kHz
SP Package (SOP-8<Exposed Pad>)
8
7
6
5
1
2
PHASE
COMP/SD
FB
BOOT
UGATE
GND
3
4
GND
VCC
LGATE/OCSET
Figure 1. Pin Assignment of FP6329/A
FP6329/A/B-1.0-APR-2010
1