◆可靠性试验项目 Reliability Testing Item
序号
项目
测试标准
测试方法
Test method
特性
NO
Item
Standard
Performance
逐渐施加规定的力,并保持装置固定 10±1 秒。
Gradually applying the force specified and keeping the unit
fixed for 10±1 sec.
无可见损伤。
端 子 抗 拉 强 度
Tensile
压敏电压变化率在±5%
内。
IEC
引线直径
拉力
Force(N)
10
1
Strength of
Terminals
60068-2-21
Terminal diameter(mm)
0.5<d≤0.8
No visible damage.
丨△V/V 丨≤5%.
0.8<d≤1.25
1.25<d
20
40
固定试样,并将以下规定的力施加到每个引脚上。将样品弯曲
至 90°,然后回到原样位置。在相反的方向上重复此步骤。
Hold specimen and apply the force specified below to each
lead. Bend the specimen to 90°, then return to the original
position. Repeat the procedure in the opposite direction.
引线弯折试验
Bending
无可见损伤。
压敏电压变化率在±5%
内。
IEC
2
Strength of
Terminals
60068-2-21
引线直径
拉力
No visible damage.
丨△V/V 丨≤5%.
Terminal diameter(mm)
0.5<d≤0.8
Force(Kg)
5
0.8<d≤1.25
1.25<d
10
20
振动频率:10 ~ 55 Hz
无可见损伤。
振动试验
Resistance
Vibration
振幅:0.75mm 或 98 m/s2
压敏电压变化率在±5%
内。
IEC 60068-2-6
3 方向,持续时间:6 小时(3 x 2 小时)
Frequency range:10Hz-55Hz,
3
No visible damage.
丨△V/V 丨≤5%.
Amplitude: 0.75mm or 98m/s2,three direction,Total duration:
6h.
无可见损伤。
400m/S2,6ms,三个方向,共 4000 次。
压敏电压变化率在±5%
碰撞
IEC
4
Acceleration: 400m/S2 , 6ms , three direction , umber of 内。
Bump
60068-2-29
bumps: 4000。
No visible damage.
丨△V/V 丨≤5%.
溶剂:丙酮溶液
无损伤、标志清楚,容易
辨认。
温度:23±5℃
耐溶剂性
IEC
浸入时间:1 分钟。
Class of reagent :acetone solution
Test temperature:23±5℃
Immersing time:1min
5
Permanency of
marking
60068-2-45
No visible damage and
legibly marking.
丨△V/V 丨≤5%.
着锡面积≧95%
IEC
可焊性
槽焊法 245±3℃, 3±0.3 秒
At least 95% of terminal
electrode is covered by
new solder.
6
60068-2-20
Solderability
Solder bath method 245±5℃,3±0.3ses.
15