Single-Stage Filters FN 2450
DATASHEET
Safe and ergonomic EMC/EMI filter with very low leakage current
Light weight plastic enclosure design
Very low filter leakage current
Hinged safety covers
Approvals
Embedded filter terminals
Different performance levels
Environmental friendly design without potting
compound
Features and benefits
A plastic housing and a metal ground plate are
cleverly combined to get the lowest possible
product weight without compromising EMC
behaviour
Performance indicators
The embedded terminals from Schaffner guarantee
user-friendly handling and reliable, long-lasting
electrical connection
Captive hinged protective covers contribute to
overall safety by offering protection against
unintended contact with life conductors. They are
included in the standard scope of delivery without
any extra cost
Very low leakage current values make the filters
suitable for grids with very tough requirements or
sensitive GFCIs, and for applications which set value
on safety and reliability
Technical specifications
FN 2450 feature an ecologically conscious
construction without the use of potting compound
or banned substances (RoHS). Used raw materials
can be easily separated at the end of the product
life time for proper and environmentally safe
disposal
250 VAC, 50/60 Hz
6 to 20 A @ 55°C
DC to 400 Hz
Maximum continuous operating voltage
Rated currents
Operating frequency
P/N -> E 2500 VAC for 60 sec *
P -> N 1100 VDC for 2 sec
High potential test voltage
-25°C to +100°C (25/100/21)
Temperature range (operation and storage)
Flammability corresponding to
Design corresponding to
Typical applications
UL 94 V-0 (safety covers UL 94V-1)
UL 1283, CSA 22.2 No. 8 1986,
IEC/EN 60939, EN 60601-1
Electrical and electronic equipment
Test and measurement devices
Medical devices n Industrial automation
Small machines
>180,000 hours
MTBF @ 40°C/230 V (Mil-HB-217F)
* Type testing only
Office automation equipment
Typical electrical schematic