The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.3 mm Pitch, 0.65 mm above the board, Top Contact, Back-Flip
actuator Flexible Printed Circuit ZIF Connectors
FH42 Series
Height 0.65mm
0.65mm
Figure. 1
■Features
Simple FPC insertion
1.Low-profile and space-saving 0.3mm pitch,
actuator
top contact point, connector
A top contact point type connector, low-profile and space-
saving design, with 0.65mm height and 3.55mm depth
(implementation depth: 3.08mm).
2.FPC retention secured, despite the low profile
Improved FPC horizontal retention by reinforcing the clasp
temporary retention mechanism.
FPC
3.Delivered with the actuator open
FPC can be immediately inserted without the need for the
opening of the actuator.
4.Favorable FPC insertion, despite the low profile
Figure. 2
- The unique clasp form means an audible click when the FPC
goes over the clasp, while also preventing incorrect
(diagonal) insertion of FPC.
- Despite the temporary retention mechanism of the
reinforcing clasp, horizontal insertion of FPC is possible.
Lock
5.Accepts standard FPC thickness
0.12mm thick standard Flexible Printed Circuit (FPC) can be
used. This is the only ultra-low profile ZIF connector using
standard FPC.
6.Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
7.Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement. Standard reel packaging
contains 5,000 connectors.
Figure. 3
*
8.Halogen-free
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
2010.9
1