Datasheet > FH34SW-12S-0.5SH

FH34SW-12S-0.5SH

更新时间： 2022-12-29 21:42:51

品牌	Logo	应用领域
广濑 - HRS		/
页数	文件大小	规格书
12页	300K
描述
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

FH34SW-12S-0.5SH 数据手册

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip

actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH34(S)Series

Increased FPC/FFC holding force

Space saving (30 pos. shown)

Actuator

Metal fittings

1.0mm

3.2mm

Easy FPC/FFC insertion

Back opening rotating

All four

sides are

chamfered.

Top contacts

ꢀFeatures

1. Low-profile

With the 1.0 mm above the board and width of 3.8 mm the

connectors are used in space saving applications.

Ready to insert FPC/FFC

Delivered with

the actuator open

2. Increased FPC/FFC retention

As compared with existing similar construction connectors:

* In horizontal direction: Approximately 2.6 times

* In vertical direction: Approximately 2 times

3. Unique Back-Flip rotating actuator

The rotating actuator opens from the back of the connector,

assuring reliable electrical and mechanical connection.

4. Easy FPC insertion and reliable electrical connection

Proven Flip Lock actuator allows easy insertion of FPC and

provides a tactile sensation when fully closed, confirming

complete electrical and mechanical connection.

FPC

5. Delivered with the actuator open

FPC/FFC inserted and retained.

Completed electrical and mechanical connection.

FPC/FPC can be immediately inserted without the need for the

opening of the actuator.

6. Accepts standard FPC thickness

0.3mm thick standard Flexible Printed Circuit (FPC) can be used.

This is the only ultra-low profile ZIF connector using standard

FPC.

7. Compatible with existing connectors.

FPC/FFC and PCB mounting patterns are the same as for the

FH19SC Series (bottom contact), allowing the use of both

connectors for interconnections between two boards or replacement

of the connectors.

8. Conductive traces on the PCB can run under

the connector

No exposed contacts on the bottom of the connector.

9. Board placement with automatic equipment

Flat upper surface and tape and reel packaging facilitate vacuum

pick-up and placement.

Compatible with existing connectors.(FH19SC SERIES)

Standard reel packaging contains 5000 connectors.

10.Halogen-free^*

(FH34SJ,FH34SW,FH34SRJ)

*As defined by IEC61249-2-21

Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum

2012.3

12 3 4 5 6 7...12

下载PDF

与FH34SW-12S-0.5SH相关器件

型号	品牌	描述	获取价格	数据表
FH34SW-12S-0.5SH(50)	HRS	Card Edge Connector, 12 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal,	获取价格
FH34SW-12S-0.5SH50	HRS	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P	获取价格
FH34SW-4S-0.5SH	HRS	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P	获取价格
FH34SW-4S-0.5SH(50)	HRS	Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal,	获取价格
FH34SW-4S-0.5SH50	HRS	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P	获取价格
FH35-13S-0.3SHW(50)	HRS	Card Edge Connector, 13 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surfa	获取价格