FH21-5S-1DS

更新时间： 2024-01-24 18:14:36

品牌	Logo	应用领域
广濑 - HRS		连接器 FFC连接器 PC
页数	文件大小	规格书
4页	105K
描述
1mm Pitch FPC/FFC Connector

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

FH21-5S-1DS 数据手册

1mm Pitch FPC/FFC Connector

FH 21 Series

ꢀFeatures

1. LIF (Low Insertion Force) Mechanism

LIF mechanism secures mounting serviceability.

2. Kink Mechanism

DIP post is treated with kinks, and prevent connector

floating in the soldering process.

3. Contact Structure on Both Sides

The contact structure on both sides does restrict

directionality of FPC and FFC conductors.

ꢀApplications

HDD, facsimiles, printers, and crystal liquie modules, etc.

ꢀProduct Specifications

Rated Current: 0.5A

Operating Temperature Range: -30 ~ 70ç (Note 1) Storage Temperature Range: -10 ~ 50ç (Note 2)

Rating

Rated Voltage: 50V AC Operating Humidity Range: Relative humidity 90% max. Storage Humidity Range: Relative Humidity: 90% max.

(Not dewed)

Applicable FPC

Item

t=0.3 0.05 Solder plating

Specification

Condition

1. Insulation Resistance 500Mø min.

Measured at 100V DC

150V AC for 1 minute

2. Withstand voltage

Neither short nor breakdown should occur

40mø

3. Contact Resistance

Measured at 100mA

10 cycles

*FPC conductor resistance included

Contact resistance: 40mø max.

Mechanical

Operation

No part should be damaged, cracked, or loosened

Electrical discontinuity, 1µS max.

Contact resistance: 40mø

Frequency 10~55Hz and single amplitude 0.75mm in

3 directions for 2 hours, respectively.

5. Vibration

6. Shock

No part should be damaged, cracked, or loosened

Electrical discontinuity, 1µS max.

Contact resistance: 40mø max.

Acceleration: 490m/s, duration: 11ms, sine half-wave

in 3 directions for 3 cycles, respectively

No part should be damaged, cracked, or loosened

Contact resistance: 40mø max.

7. Moisture Resistance

7. in Steady State

Exposed to temperature 60ç and humidity 90~95%

Insulation resistance: 50M

ø max.

for 96 hours

No part should be damaged, cracked, or loosened

Note 1. Temperature rise included when energized

Note 2. This storage indicates a long-term storage state for the unused product before the board mounted.

Note 2. The operating temperature and humidity ranges are applied to the non-energized state after the connector has been

installed in the board.

Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification".

D15

12 3 4

下载PDF

与FH21-5S-1DS相关器件

型号	品牌	描述	获取价格	数据表
FH21-5S-1DSA	HRS	Card Edge Connector, 5 Contact(s), 1 Row(s), Female, Straight, 0.039 inch Pitch, Solder Te	获取价格
FH21-5S-DSA	HRS	Card Edge Connector, 5 Contact(s), 1 Row(s), Female, Straight, Solder Terminal	获取价格
FH2164	TE	RF MOSFET Power Transistor, 8W, 12V 30 - 90 MHz	获取价格
FH2165	ETC	TRANSISTOR \| MOSFET \| N-CHANNEL \| 65V V(BR)DSS \| 4A I(D)	获取价格
FH21-6S-1DSA	HRS	Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Straight, 0.039 inch Pitch, Solder Te	获取价格
FH21-6S-DS	HRS	Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Right Angle, Solder Terminal	获取价格