Datasheet ESPP-MIT1
Strain Gauge Pressure Transmitter
•
•
•
•
•
•
•
•
•
•
•
•
Excellent performance at very low cost
Micro-fused technology
Pressure Type: Gauge
Calibrated & temperature compensated output
Full Scale (FS) Pressure Range: from 7 to 1000 bar
Analog Output: 4-20mA, 05.-4.5V, 1-5V, 0-5V
Compensation temperature: -10oC ... 80oC
Operating temperature: -40oC … 125oC
Total error: ≤ ±1%FS
Integrated stainless steel construction, full sealed (IP65)
Compact structure
Wide range of process interfaces
Product Summary
ES Systems has developed a series of pressure sensor transmitters featuring very good
accuracy at low cost. Each module is based on all welded hermetically sealed structure in a
single stainless-steel piece. The ESPP-MIT1 is a medium isolated pressure sensor suitable for
gas or fluid pressure measurements in harsh environments.
The output is fully calibrated and temperature compensated based on the internal
temperature sensor and the factory calibration coefficients which are stored in the embedded
memory. Thus, the transducer is ready to be installed directly to the end user system without
further processing.
ESPP-MIT1 comes with a variety of electrical interfaces output signal types and process
interfaces. It is one of the most cost-effective solutions especially when high volumes are
required.
Typical Applications
•
•
•
•
•
•
•
Central air conditioning control systems
Engineering machinery
Energy & water treatment systems
Hydraulic & pneumatic systems
Industrial process control & automatic detection systems
Pumps & compressors
Refrigeration systems
v1.5