Enpirion® Power Datasheet
EP53A7LQI/EP53A7HQI 1A PowerSoC
Light Load Mode Buck Regulator
with Integrated Inductor
Description
Features
The EP53A7xQI (x = L or H) is a 1000mA
PowerSOC. The EP53A7xQI integrates MOSFET
switches, control, compensation, and the
magnetics in an advanced 3mm x 3mm QFN
Package.
• Integrated Inductor Technology
• 3mm x 3mm x 1.1mm QFN package
• Total Solution Footprint < 21mm2
• Low VOUT ripple for RF compatibility
• High efficiency, up to 94%
Integrated magnetics enables a tiny solution
footprint, low output ripple, low part-count, and
high reliability, while maintaining high efficiency.
The complete solution can be implemented in as
little as 21mm2.
• 1000mA continuous output current
• 55µA quiescent current
• Less than 1µA standby current
A proprietary light load mode (LLM) provides high • 5 MHz switching frequency
efficiency in light load conditions.
• 3 pin VID for glitch free voltage scaling
The EP53A7xQI uses a 3-pin VID to easily select
the output voltage setting. Output voltage
settings are available in 2 optimized ranges
providing coverage for typical VOUT settings.
• VOUT Range 0.6V to V – 0.5V
IN
• Short circuit and over current protection
• UVLO and thermal protection
• IC level reliability in a PowerSOC solution
The VID pins can be changed on the fly for fast
dynamic voltage scaling. EP53A7LQI further has
the option to use an external voltage divider.
Application
• Portable wireless and RF applications
The EP53A7xQI offers the optimal combination
of very small solution footprint and advanced
performance features.
• Solid state storage applications
• Space constrained applications requiring high
efficiency and very small solution size
3.5mm
100 ohm
4.7uF
VOUT
100 Ohm
PVIN
VOUT
VIN
VSENSE
AVIN
ENABLE
LLM
10µF
4.7µF
VFB
VS0
EP53A7xQI
6mm
VS1
VS2
AGND
PGND
10uF
Figure 2: Typical Application Schematic
Figure 1: Total Solution Footprint
www.altera.com/enpirion
01543
October 11, 2013
Rev D