EL2211CN

更新时间： 2024-01-05 14:04:56

品牌	Logo	应用领域
ELANTEC		运算放大器放大器电路光电二极管局域网
页数	文件大小	规格书
12页	192K
描述
Low Cost, Dual, Triple and Quad Video Op Amps

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

EL2211CN 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
包装说明：	SO-8	Reach Compliance Code：	unknown
风险等级：	5.88	放大器类型：	OPERATIONAL AMPLIFIER
JESD-30 代码：	R-PDSO-G8	JESD-609代码：	e0
功能数量：	1	端子数量：	8
封装主体材料：	PLASTIC/EPOXY	封装代码：	SOP
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	NOT SPECIFIED	认证状态：	Not Qualified
子类别：	Operational Amplifier	表面贴装：	YES
技术：	BIPOLAR	温度等级：	INDUSTRIAL
端子面层：	Tin/Lead (Sn/Pb)	端子形式：	GULL WING
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
Base Number Matches：	1

EL2211CN 数据手册

EL2210C/11C, EL2310C/11C, EL2410C/11C

Low Cost, Dual, Triple and Quad Video Op Amps

EL2211C. The total dual amplifier power dissipation

would be 146mW + 240mW = 386mW, more than the

maximum 361mW allowed. If the total supply differ-

ence were reduced to 10V, the same calculations would

yield 200mW quiescent power dissipation and 120mW

due to loading. This results in a die temperature of

143°C (85°C + 58°C).

Printed-Circuit Layout

The EL2210C/EL2211C/EL2310C/EL2311C/

EL2410C/EL2411C are well behaved, and easy to apply

in most applications. However, a few simple techniques

will help assure rapid, high quality results. As with any

high-frequency device, good PCB layout is necessary

for optimum performance. Ground-plane construction is

highly recommended, as is good power supply bypass-

ing. A 0.1µF ceramic capacitor is recommended for

bypassing both supplies. Lead lengths should be as short

as possible, and bypass capacitors should be as close to

the device pins as possible. For good AC performance,

parasitic capacitances should be kept to a minimum at

both inputs and at the output. Resistor values should be

kept under 5kW because of the RC time constants associ-

ated with the parasitic capacitance. Metal-film and

carbon resistors are both acceptable, use of wire-wound

resistors is not recommended because of their parasitic

inductance. Similarly, capacitors should be low-induc-

tance for best performance.

In the above example, if the supplies were split ±6V and

the 150W loads were connected to ground, the load

induced power dissipation would drop to 66.7mW

(6.67mA * (6 - 1) * 2) and the die temperature would be

below the rated maximum.

Video Performance

Following industry standard practices (see EL2044C

applications section) these six devices exhibit good dif-

ferential gain (dG) and good differential phase (dP) with

±5V supplies and an external 820W resistor to the nega-

tive supply, in a gain of 2 configuration. Driving 75W

back terminated cables to standard video levels (1.428V

at the amplifier) the EL2210C, EL2310C, and EL2410C

have dG of 0.1% and dP of 0.2°. The EL2211C,

EL2311C, and EL2411C have dG of 0.04% and dP of

0.15°.

Due to the negative swing limitations described above,

inverted video at a gain of 2 is just not practical. If

swings below ground are required then changing the

extra 820W resistor to 500W will allow reasonable dG

and dP to approximately -0.75mV. The EL2211C,

EL2311C, and EL2411C will achieve approximately

0.1%/0.4° between 0V and -0.75V. Beyond -0.75V dG

and dP get worse by orders of magnitude.

Differential gain and differential phase are fairly con-

stant for all loads above 150W. Differential phase

performance will improve by a factor of 3 if the supply

voltage is increased to ±6V.

Output Drive Capability

None of these devices have short circuit protection. Each

output is capable of more than 100mA into a shorted

output. Care must be used in the design to limit the out-

put current with a series resistor.

1...5 6 789 10 11 12

下载PDF

与EL2211CN相关器件

型号	品牌	描述	获取价格	数据表
EL2211CS	ELANTEC	Low Cost, Dual, Triple and Quad Video Op Amps	获取价格
EL2211CS	INTERSIL	Low Cost, Dual, Triple and Quad Video Op Amps	获取价格
EL22120000J0G	AMPHENOL	Strip Terminal Block,	获取价格
EL22120100J0G	AMPHENOL	Strip Terminal Block,	获取价格
EL22150100J0G	AMPHENOL	Strip Terminal Block,	获取价格
EL2220CN	ELANTEC	Operational Amplifier, 2 Func, 20000uV Offset-Max, BIPolar, PDIP8,	获取价格

与EL2211CN相关文章

STM32H743技术深度剖析与应用案例探索
2024-05-30

17
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
2024-05-30

16
74HC14芯片资料介绍：性能特性分析、引脚介绍
2024-05-30

14
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
2024-05-30

11

产品中心

服务支持

精选活动

关于我们

帮助中心

EL2211CN

EL2211CN 技术参数

EL2211CN 数据手册

与EL2211CN相关器件

与EL2211CN相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

EL2211CN

EL2211CN 技术参数

EL2211CN 数据手册

与EL2211CN相关器件

与EL2211CN相关文章

您还可以找

您在本页遇到什么问题？