ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
EA9777-3
Page 7
FUNCTION OF PUSHBUTTONS
- “Resetbutton“: As long as you push this button the
EA eDIP is in Reset mode (RESET to GND). After
release of button PowerOnMacro is run.
- “Input1-8“: These8buttonsaredirectlyconnected
to the inputs of the EA eDIPTFTs. If you push a
button the corresponding input is
grounded. Please refer to the
schematic on the last page of this
datasheet.
USB-INTERFACE
The Evaluation board is connected to a free USB-port of your PC using the supplied USB-cable. The
USB-InterfaceislocatedattheupperleftcorneroftheEvalation
board.
If you connect the USB-cable, the LED “USB-Power“ (green) is
on. If the driver for Windows is installed correctly the LED “USB
driver“ is also lit.
The scope of delivery includes a CD on which you can find the
drivers for the board under “d:\Driver\. These drivers are
designed for Windows 2000, XP, Vista, 7. To install the drivers
please follow the instructions of your operating system.
(EXTERNAL) POWERSUPPLY
The EVAL-board has a 2.1 mm power socket for
external supply. The supply range is between 12V to
28VAC.
Externalsupplyisoptionalifyouareusing thestarterkit
EA EVLAeDIP320, i.e. normally power over USB is
used.
Both of the starterkits of EA eDIPTFT-series need
external supply, an AC-adapter is included with your
delivery.
The supply source is selcted by a solder bridge, which
is preset correctly.