E32D1 Series
E32D1
• Voltage Controlled Crystal Oscillators (VCXO)
• LVPECL Output
• +3.3V Supply Voltage
• Complementary Output
H 2.0
L 7.0
W 5.0
• Tri-State Output Function (Pad 2)
• External Voltage Control Function
• 6 Pad Ceramic SMD Package
• RoHS Compliant (Pb-Free)
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
50, 51.84, 52, 52.08, 54, 57.1429, 61.44, 63.36, 65.536, 76.8, 77.76, 100, 104, 106.25, 122.88,
125, 126.72, 128, 153.6, 155.52, 156.25, 159.375, 161.1328, 166.6286, 167.3315, 184.32,
186.666, 200MHz
Operating Temperature Range
0°C to +70°C
-40°C to +85°C
-55°C to +125°C
3.3VDC 5ꢀ
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Frequency Tolerance / Stability
With Load
100mA Maximum
50ppm or 25ppm Maximum
Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature
Range, Supply Voltage Change, Output Load Change, 1st
Year Aging, Shock, and Vibration
Output Voltage Logic High (VOH
)
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
1.5 nSeconds Maximum
50 10(ꢀ)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
50 5(ꢀ)
50 Ohms into VCC-2.0VDC
1.65VDC 1.65VDC
Load Drive Capability
Control Voltage (VC)
Test Conditions for Frequency Deviation
Control Voltage Range (VCR)
Frequency Deviation
0.0VDC to VCC +0.5VDC
75ppm Minimum
Inclusive of Operating Temperature Range, Supply
Voltage Change, and Output Load Change
Linearity
Transfer Function
20ꢀ, 15ꢀ, or 10ꢀ Maximum
Positive Transfer Characteristic
10kHz Minimum
50kOhms Typical
-55dBc/Hz
Modulation Bandwidth (MBW)
Input Impedance (ZI)
Typical Phase Noise (Fo = 155.520MHz) at 10Hz Offset
at 100Hz Offset
at 1kHz Offset
Measured at -3dB with Contol Voltage of +1.65VDC
-90dBc/Hz
-120dBc/Hz
at 10kHz Offset
at 100kHz Offset
at 1MHz Offset
-140dBc/Hz
-145dBc/Hz
-148dBc/Hz
Logic Control/Additional Output
Tri-State Input Voltage
Tri-State Enable Low / Complementary Output
Disables Outputs: High Impedance
Enables Output
VIH of 70ꢀ of VCC Minimum
No Connection
VIL of 30ꢀ of VCC Maximum
FJ = 12kHz to 20MHz
Sigma of Total Jitter Distribution
Sigma of Random Jitter
Sigma of Total Jitter Distribution
Deterministic Jitter
Enables Output
RMS Phase Jitter
Accumulated Period Jitter (tacc
Period Jitter (trj)
Period Jitter (trms
Period Jitter (tdj)
Period Jitter (tp-p
Start Up Time
0.4pSec Typical, 1pSec Maximum
4pSec Typical, 5pSec Maximum
3pSec Typical, 5pSec Maximum
3pSec Typical, 5pSec Maximum
4pSec Typical, 10pSec Maximum
27pSec Typical, 40pSec Maximum
10 mSeconds Maximum
)
)
)
Peak to Peak of Jitter Distribution
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E32D1
CERAMIC
3.3V
OS3Y
01/11
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.