DSC2044FE1-H0002
Crystal-less™ Configurable Clock Generator
General Description
Features
The DSC2044FE1-H0002 is a programmable, high
performance dual HCSL output oscillator utilizing
Micrel's proven silicon MEMS technology to provide
excellent jitter and stability while incorporating
additional device functionality. Two HCSL outputs
are controlled by separate supply voltages to allow for
high output isolation. The frequencies of the outrputs
can be identical or independently derived from a
common PLL frequency source.
• Frequency and output formats:
- HCSL
200/100/156.25/100/125/125/50/200MHz
- HCSL
100/100/156.25/50/125/50/50/50MHz
• Low RMS phase jitter: <1ps (typ)
• ±50ppm frequency stability
• -20°C to +70°C ext. commercial temperature range
• High supply noise rejection: -50dBc
• Pin-selectable configurations
- Up to 8 output frequency combinations
• Excellent shock & vibration immunity
- Qualified to MIL-STD-883
The DSC2044FE1-H0002 has provision for up to eight
user-defined pre-programmed, pin-selectable output
frequency combinations.
Applications
• High reliability
• Consumer Electronics
- 20x better MTF than quartz oscillators
• Supply range of 2.25 to 3.6V
• AEC-Q100 automotive qualified
• 14-pin 3.2mm x 2.5mm QFN package
• Storage Area Networks
- SATA, SAS, Fibre Channel
• Passive Optical Networks
- EPON, 10G-EPON, GPON, 10G-GPON
• Ethernet
- 1G, 10GBASE-T/KR/LR/SR, and FCoE
• HD/SD/SDI Video & Surveillance
• PCI Express
• Automotive
VDD/VDD2
Block Diagram
CLK1+
200MHz HCSL
CLK1-
Control Circuitry
÷ 2
÷ M1
MEMS
PLL
CLK2+
÷ 2
÷ M2
100MHz HCSL
CLK2-
FS0/FS1/FS2
OE
VSS
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
December 14, 2015
3422
Revision 1.0
tcghelp@micrel.comor (408) 955-1690