Datasheet > DS2480B/T&R

DS2480B/T&R

更新时间： 2024-01-28 01:09:13

品牌	Logo	应用领域
美信 - MAXIM		驱动光电二极管接口集成电路驱动器
页数	文件大小	规格书
32页	478K
描述
Line Driver, 1 Func, 1 Driver, PDSO8, 0.150 INCH, SOP-8

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

DS2480B/T&R 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	SOIC	包装说明：	0.150 INCH, SOP-8
针数：	8	Reach Compliance Code：	not_compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.4	差分输出：	NO
驱动器位数：	1	输入特性：	STANDARD
接口集成电路类型：	LINE DRIVER	接口标准：	EIA-232-C
JESD-30 代码：	R-PDSO-G8	JESD-609代码：	e0
长度：	4.9 mm	功能数量：	1
端子数量：	8	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	245
认证状态：	Not Qualified	最大接收延迟：
座面最大高度：	1.75 mm	最大供电电压：	5.5 V
最小供电电压：	4.5 V	标称供电电压：	5 V
表面贴装：	YES	温度等级：	INDUSTRIAL
端子面层：	Tin/Lead (Sn/Pb)	端子形式：	GULL WING
端子节距：	1.27 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	3.9 mm
Base Number Matches：	1

DS2480B/T&R 数据手册

DS2480B

PAGES

REVISION

DATE

DESCRIPTION

CHANGED

3/17/99

10/19/99

7/1/03

Initial release

—

Removed preliminary status, deleted V_PPminspec, changed ∆V_PROGMAXto 0.30V

Changing the Communication Command Response Bit 5 to Don't Care status.

Added references to Application Note 192.

Clarification in the second paragraph of the Device Operation section.

Removed references to DOS from the search accelerator introduction.

Appended to EC table note 16: The DS2480B requires a 1-Wire reset command

sent by the host at a data rate of 9600bps for calibration. Data rates of

115200bps or higher during calibration may put the DS2480B in an undefined

state, requiring a power-down reset to restore normal operation.

Conversion to lead free, using “standard” instead of “regular” when referring to

the slower 1-Wire speed, removal of load sensor (dynamic duration) as a

feature, correction in Figures 10, 11a, 11b (filter capacitor moved to the left of

the resistor, filter resistor changed from 100Ω to 62Ω), correction of minor

oversights and style updates.

8/20/04

Various

5/10

4/15

EC table: added Voltage on VPP to Ground to Absolute Maximum Ratings,

deleted V_PPsenspr trip point, changed I_WEAKPUMAXfrom 5.0 to 5.4 mA, changed

I_ACTPUMINfrom 9 to 7 mA.

Updated Benefits and Features section

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent

licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max

limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.

Maxim Integrated...........................................................................................................................................................................................32

Maxim Integrated, 160 Rio Robles, San Jose, CA 95134 1-408-601-1000

 2015 Maxim Integrated Products, Inc.

The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.

1...29 30 3132

下载PDF

与DS2480B/T&R相关器件

型号	品牌	描述	获取价格	数据表
DS2480B+	MAXIM	Serial to 1-Wire Line Driver	获取价格
DS2480B+R	MAXIM	Serial to 1-Wire Line Driver	获取价格
DS2480B+T	MAXIM	Serial to 1-Wire Line Driver	获取价格
DS2480B+T&R	MAXIM	Line Driver, 1 Func, 1 Driver, PDSO8, 0.150 INCH, ROHS COMPLIANT, SOP-8	获取价格
DS2480BS	DALLAS	Serial 1-Wire Line Driver with Load Sensor	获取价格
DS2480S	DALLAS	Serial 1.Wire Line Driver	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

DS2480B/T&R

DS2480B/T&R 技术参数

DS2480B/T&R 数据手册

与DS2480B/T&R相关器件

与DS2480B/T&R相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DS2480B/T&R

DS2480B/T&R 技术参数

DS2480B/T&R 数据手册

与DS2480B/T&R相关器件

与DS2480B/T&R相关文章

您还可以找

您在本页遇到什么问题？