DS2480
DS2480
Serial 1–WireTM Line Driver
FEATURES
• Universal, common–ground serial port to 1–Wire
line driver for MicroLAN applications
PIN ASSIGNMENT
TM
GND
1–W
NC
1
2
3
4
8
7
6
5
RXD
TXD
POL
TM
• Works with all iButtons and MicroLAN–compatible
1–Wire slave devices
V
V
PP
DD
• Communicates at regular and Overdrive 1–Wire
speed and serial port data rates of 9600 (default),
19200, 57600 and 115200 bps
8–PIN SOIC
(150 MIL)
• Supports 12V EPROM programming and stiff 5V
PIN DESCRIPTION
pull–up for Crypto iButton, sensors and EEPROM
GND
1–W
NC
Ground
1–Wire Input/Output
No Connection
• Self–calibrating time base with ±5% tolerance for
serial and 1–Wire communication
V
DD
V
PP
4.5 to 5.5 Volts
Optional EPROM
• Slew rate controlled 1–Wire pull–down and active
pull–up to accommodate long lines and reduce radi-
ation
Programming Voltage
RXD/TXD Polarity Select
Serial Data from UART
Serial Data to UART
POL
TXD
RXD
• User–selectable RXD/TXD polarity minimizes com-
ponent count when interfacing to 5V based RS232
systems or directly to UARTs
ORDERING INFORMATION
• Programmable 1–Wire timing and driver characteris-
tics accommodate a wide range of MicroLAN configu-
rations at regular speed
DS2480S
8–pin SOIC
• Smartprotocolcombinesdataandcontrolinformation
without requiring extra pins
• Compatibleto optical, IR and RF to RS232 converters
• Low cost 8–pin SOIC surface mount package
• Operates over 4.5V to 5.5V from –40°C to +85°C
DESCRIPTION
The DS2480 is a serial port to 1–Wire interface chip that
supports standard and Overdrive speeds. It connects
directlytoUARTsand5VRS232systems. Interfacingto
RS232C (± 12V levels) requires a passive clamping cir-
cuit and one 5V to ± 12V level translator. Internal timers
relieve the host of the burden of generating the time–
critical 1–Wire communication waveforms. In contrast
to the DS9097(E) where a full character must be sent by
the host for each 1–Wire time slot, the DS2480 can
translate each character into eight 1–Wire time slots
thereby increasing the data throughput significantly. In
addition, the DS2480 can be set to communicate at four
different data rates including 115.2 kbps, 57.6 kbps and
19.2 kbps with 9.6 kbps being the power–on default.
Command codes received from the host’s crystal con-
trolled UART serve as a reference to continuously cali-
bratetheon–chiptiminggenerator. The DS2480 uses a
unique protocol that merges data and control informa-
tion without requiring control pins. This approach main-
tains compatibility to off–the–shelf serial to wireless
converters allowing easy realization of 1–Wire media
jumpers. The various control functions of the DS2480
are optimized for MicroLAN 1–Wire networks and sup-
port the special needs of all current 1–Wire devices
includingthe Crypto iButton, EPROM–basedAdd–Only
Memories, EEPROM devices and 1–Wire Thermome-
ters.
042498 1/26
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
