5秒后页面跳转
DS1922L_11 PDF预览

DS1922L_11

更新时间: 2024-09-26 09:56:15
品牌 Logo 应用领域
美信 - MAXIM 存储
页数 文件大小 规格书
52页 593K
描述
Temperature Logger iButton with 8KB Data-Log Memory

DS1922L_11 数据手册

 浏览型号DS1922L_11的Datasheet PDF文件第2页浏览型号DS1922L_11的Datasheet PDF文件第3页浏览型号DS1922L_11的Datasheet PDF文件第4页浏览型号DS1922L_11的Datasheet PDF文件第5页浏览型号DS1922L_11的Datasheet PDF文件第6页浏览型号DS1922L_11的Datasheet PDF文件第7页 
19-4990; Rev 10; 4/11  
Temperature Logger iButton with 8KB  
Data-Log Memory  
L/DS192T  
Two-Level Password Protection of All Memory  
General Description  
and Configuration Registers  
®
The DS1922L/DS1922T temperature logger iButtons are  
rugged, self-sufficient systems that measure temperature  
and record the result in a protected memory section. The  
recording is done at a user-defined rate. A total of 8192  
8-bit readings or 4096 16-bit readings, taken at equidistant  
intervals ranging from 1s to 273hr, can be stored.  
Additionally, 512 bytes of SRAM store application-specific  
information and 64 bytes store calibration data. A mission  
to collect data can be programmed to begin immediately,  
after a user-defined delay, or after a temperature alarm.  
Access to the memory and control functions can be pass-  
word protected. The DS1922L/DS1922T are configured  
and communicate with a host-computing device through  
Communicates to Host with a Single Digital Signal  
Up to 15.4kbps at Standard Speed or Up to  
125kbps in Overdrive Mode Using 1-Wire Protocol  
Operating Temperature Range: DS1922L: -40°C to  
ꢀ85°C; DS1922T: 0°C to ꢀ125°C  
Common iButton Features  
Digital Identification and Information by  
Momentary Contact  
Unique Factory-Lasered 64-Bit Registration Number  
Ensures Error-Free Device Selection and Absolute  
Traceability Because No Two Parts Are Alike  
Built-In Multidrop Controller for 1-Wire Net  
Chip-Based Data Carrier Compactly Stores Information  
Data Can Be Accessed While Affixed to Object  
®
the serial 1-Wire protocol, which requires only a single  
data lead and a ground return. Each DS1922L/DS1922T is  
factory lasered with a guaranteed unique 64-bit registration  
number that allows for absolute traceability. The durable  
stainless-steel package is highly resistant to environmental  
hazards such as dirt, moisture, and shock. Accessories  
permit the DS1922L/DS1922T to be mounted on almost  
any object, including containers, pallets, and bags.  
Button Shape is Self-Aligning with Cup-Shaped  
Probes  
Durable Stainless-Steel Case Engraved with  
Registration Number Withstands Harsh Environments  
Applications  
High-Temperature Logging (Process Monitoring,  
Industrial Temperature Monitoring)  
Easily Affixed with Self-Stick Adhesive Backing,  
Latched by Its Flange, or Locked with a Ring  
Pressed Onto Its Rim  
Presence Detector Acknowledges When Reader  
Temperature Logging in Cold Chain, Food Safety, Bio  
Science, and Pharmaceutical and Medical Products  
First Applies Voltage  
Meets UL 913, 5th Ed., Rev. 1997-02-24; Intrinsically  
Safe Apparatus: Approved Under Entity Concept  
for Use in Class I, Division 1, Group A, B, C, and D  
Locations  
Features  
Automatically Wakes Up, Measures Temperature,  
and Stores Values in 8KB of Data-Log Memory in  
8-Bit or 16-Bit Format  
Ordering Information  
Digital Thermometer Measures Temperature with  
PART  
TEMP RANGE  
-40°C to +85°C  
0°C to +125°C  
PIN-PACKAGE  
8-Bit (0.5°C) or 11-Bit (0.0625°C) Resolution  
DS1922L-F5#  
DS1922T-F5#  
F5 iButton  
Accuracy of 0.5°C from -10°C to ꢀ65°C  
(DS1922L), 0.5°C from ꢀ20°C to ꢀ75°C  
(DS1922T), with Software Corrections  
Water Resistant or Waterproof if Placed Inside  
DS9107 iButton Capsule (Exceeds Water  
Resistant 3 ATM Requirements)  
F5 iButton  
#Denotes a RoHS-compliant device that may include lead(Pb)  
that is exempt under the RoHS requirements.  
Examples of Accessories  
Sampling Rate from 1s Up to 273hr  
PART  
DS9096P  
ACCESSORY  
Self-Stick Adhesive Pad  
Multipurpose Clip  
Mounting Lock Ring  
Snap-in FOB  
Programmable High and Low Trip Points for  
Temperature Alarms  
DS9101  
Programmable Recording Start Delay After Elapsed  
DS9093RA  
DS9093A  
DS9092  
Time or Upon a Temperature Alarm Trip Point  
Quick Access to Alarmed Devices Through 1-Wire  
Conditional Search Function  
iButton Probe  
512 Bytes of General-Purpose Memory Plus 64  
Pin Configuration appears at end of data sheet.  
Bytes of Calibration Memory  
iButton and 1-Wire are registered trademarks of Maxim Integrated Products, Inc.  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,  
or visit Maxim’s website at www.maxim-ic.com.  

与DS1922L_11相关器件

型号 品牌 获取价格 描述 数据表
DS1922L|DS1922T DALLAS

获取价格

Temperature Logger iButton with 8kB Datalog Memory
DS1922L-F5 DALLAS

获取价格

Temperature Logger iButton With 8kB Datalog Memory
DS1922L-F5 MAXIM

获取价格

Temperature Logger iButton With 8kB Datalog Memory
DS1922L-F5# MAXIM

获取价格

暂无描述
DS1922T DALLAS

获取价格

Temperature Logger iButton With 8kB Datalog Memory
DS1922T ADI

获取价格

iButton温度记录器,带有8KB数据记录存储器
DS1922T-F5 DALLAS

获取价格

Temperature Logger iButton With 8kB Datalog Memory
DS1922T-F5 MAXIM

获取价格

Temperature Logger iButton With 8kB Datalog Memory
DS1922T-F5# MAXIM

获取价格

Analog Circuit, 1 Func, ROHS COMPLIANT PACKAGE-2
DS1923 MAXIM

获取价格

Hygrochron Temperature/Humidity Logger iButton with 8KB Data-Log Memory