Datasheet > DS1775R/TR6

DS1775R/TR6

更新时间： 2022-11-26 02:05:28

品牌	Logo	应用领域
达拉斯 - DALLAS		监控
页数	文件大小	规格书
13页	233K
描述
SOT23-5 Digital Thermometer and Thermostat

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DS1775R/TR6 数据手册

DS1775

Figure 5 details how data transfer is accomplished on the two–wire bus. Depending upon the state of the

R/W bit, two types of data transfer are possible:

1. Data transfer from a master transmitter to a slave receiver. The first byte transmitted by the

master is the slave address. Next follows a number of data bytes. The slave returns an acknowledge

bit after each received byte.

2. Data transfer from a slave transmitter to a master receiver. The first byte (the slave address) is

transmitted by the master. The slave then returns an acknowledge bit. Next follows a number of data

bytes transmitted by the slave to the master. The master returns an acknowledge bit after all received

bytes other than the last byte. At the end of the last received byte, a ‘not acknowledge’ is returned.

The master device generates all of the serial clock pulses and the START and STOP conditions. A

transfer is ended with a STOP condition or with a repeated START condition. Since a repeated START

condition is also the beginning of the next serial transfer, the bus will not be released.

The DS1775 may operate in the following two modes:

1. Slave receiver mode: Serial data and clock are received through SDA and SCL. After each byte is

received, an acknowledge bit is transmitted. START and STOP conditions are recognized as the

beginning and end of a serial transfer. Address recognition is performed by hardware after reception

of the slave address and direction bit.

2. Slave transmitter mode: The first byte is received and handled as in the slave receiver mode.

However, in this mode, the direction bit will indicate that the transfer direction is reversed. Serial data

is transmitted on SDA by the DS1775 while the serial clock is input on SCL. START and STOP

conditions are recognized as the beginning and end of a serial transfer.

SLAVE ADDRESS

A control byte is the first byte received following the START condition from the master device. The

control byte consists of a four bit control code; for the DS1775, this is set as 1001 binary for read and

write operations. The next three bits of the control byte are the device select bits (A2, A1, A0). These bits

are set to 000 (A2="0", A1="0", A0="0") for the DS1775R/TRL and vary according to the device's part

number as specified in the "Ordering Information" section. They are used by the master device to select

which of eight devices are to be accessed. The set bits are in effect the three least significant bits of the

slave address. The last bit of the control byte (R/ W ) defines the operation to be performed. When set to a

"1" a read operation is selected, and when set to a "0" a write operation is selected. Following the START

condition, the DS1775 monitors the SDA bus checking the device type identifier being transmitted. Upon

receiving the 1001 code and appropriate device select bits of 000, the DS1775 outputs an acknowledge

signal on the SDA line.

9 of 13

102299

1...6 7 8910 11 12 13

下载PDF

与DS1775R/TR6相关器件

型号	品牌	描述	获取价格	数据表
DS1775R/TR7	DALLAS	SOT23-5 Digital Thermometer and Thermostat	获取价格
DS1775R/TRL	DALLAS	SOT23-5 Digital Thermometer and Thermostat	获取价格
DS1775R+T&R	MAXIM	Serial Switch/Digital Sensor, 12 Bit(s), 2Cel, Rectangular, 5 Pin, Surface Mount, SOT-23,	获取价格
DS1775R+U	MAXIM	Serial Switch/Digital Sensor, 12 Bit(s), 2Cel, Rectangular, 5 Pin, Surface Mount, SOT-23,	获取价格
DS1775R+U	ROCHESTER	DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 2Cel, RECTANGULAR, SURFACE MOUNT, ROHS COMPLIANT, SO	获取价格
DS1775R1	MAXIM	Serial Switch/Digital Sensor, 9 Bit(s), 2Cel, Rectangular, Surface Mount, LEAD FREE, SOT-2	获取价格

与DS1775R/TR6相关文章

SG3525资料手册详解：SG3525参数分析、引脚说明、应用介绍
2024-05-23

2
AT89C51单片机资料手册详细解析及应用示例
2024-05-23

5
CP2102资料手册解读：CP2102引脚说明、关键参数分析
2024-05-23

3
资料手册解读：UC3842参数和管脚说明
2024-05-22

5

产品中心

服务支持

精选活动

关于我们

帮助中心

DS1775R/TR6

DS1775R/TR6 数据手册

与DS1775R/TR6相关器件

与DS1775R/TR6相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DS1775R/TR6

DS1775R/TR6 数据手册

与DS1775R/TR6相关器件

与DS1775R/TR6相关文章

您还可以找

您在本页遇到什么问题？