5秒后页面跳转
DS1721 PDF预览

DS1721

更新时间: 2023-12-20 18:45:51
品牌 Logo 应用领域
亚德诺 - ADI 监控
页数 文件大小 规格书
17页 257K
描述
数字温度计和温度监控器

DS1721 数据手册

 浏览型号DS1721的Datasheet PDF文件第3页浏览型号DS1721的Datasheet PDF文件第4页浏览型号DS1721的Datasheet PDF文件第5页浏览型号DS1721的Datasheet PDF文件第7页浏览型号DS1721的Datasheet PDF文件第8页浏览型号DS1721的Datasheet PDF文件第9页 
DS1721  
R0, R1 = Thermometer Resolution Bits. Table 3 below defines the resolution of the digital thermometer,  
based on the settings of these two bits. There is a direct tradeoff between resolution and conversion time,  
as depicted in the DC Electrical Characteristics: Digital Thermometer table. The designer has read/write  
access to R0 and R1, and the default state is R0="1" and R1="1" (12-bit conversions).  
THERMOMETER RESOLUTION CONFIGURATION Table 3  
MAX  
THERMOMETER  
RESOLUTION  
9-BIT  
CONVERSION  
TIME  
R1  
0
R0  
0
93.75ms  
187.5ms  
375ms  
0
1
10-BIT  
1
0
11-BIT  
1
1
12-BIT  
750ms  
X = Undefined. These bits are used internally by the DS1721.  
DONE = Temperature Conversion Status Bit. "1" = conversion complete and "0" = conversion in  
progress. The DONE bit is read-only, and the power-up state is "1". In the continuous conversion mode,  
DONE = "0".  
Thermostat Setpoints Programming  
The thermostat registers (TH and TL) define the setpoints for operation of the TCOM output. The  
respective register can be accessed over the 2-wire bus via the Access TH (A1h) or Access TL (A2h)  
commands. Reading from or writing to the respective register is controlled by the state of the R/ W bit in  
the 2-wire control byte (See “2-Wire Serial Data Bus” section).  
The format of the TH and TL registers is a 12-bit 2’s complement representation of the temperature in °C.  
The user can program the number of bits (9, 10, 11, or 12) for each TH and TL that correspond to the  
thermometer resolution configuration chosen. If the 9-bit mode is chosen, for example, the 3 least  
significant bits of TH and TL will be ignored by the thermostat comparator. The format for both TH and  
TL is shown in Figure 4. The power-up default of TH is 80°C and that for TL is 75°C.  
TEMPERATURE/DATA RELATIONSHIPS Figure 4  
S
26  
25  
24  
23  
0
22  
0
21  
0
20  
LSb  
0
MSB  
LSB  
MSb  
2-1  
(UNIT = °C)  
2-2  
2-3  
2-4  
TEMP  
DIGITAL OUTPUT  
(Binary)  
DIGITAL OUTPUT  
(Hex)  
+80°C  
+75°C  
0101 0000 0000 0000  
0100 1011 0000 0000  
0000 1010 0010 0000  
0000 0000 1000 0000  
0000 0000 0000 0000  
1111 1111 1000 0000  
1111 0101 1110 0000  
1110 0110 1111 0000  
1100 1001 0000 0000  
5000h  
4B00h  
+10.125°C  
+0.5°C  
0A20h  
0080h  
+0°C  
0000h  
-0.5°C  
FF80h  
-10.125°C  
-25.0625°C  
-55°C  
F5E0h  
E6F0h  
C900h  
6 of 17  

与DS1721相关器件

型号 品牌 描述 获取价格 数据表
DS1721S MAXIM 2-Wire Digital Thermometer and Thermostat

获取价格

DS1721S/T&R MAXIM Serial Switch/Digital Sensor, 12 Bit(s), 1Cel, Rectangular, 8 Pin, Surface Mount, 0.150 IN

获取价格

DS1721S/T&R+W MAXIM Serial Switch/Digital Sensor,

获取价格

DS1721S/T,R MAXIM 2-Wire Digital Thermometer and Thermostat

获取价格

DS1721S+ MAXIM Serial Switch/Digital Sensor, 12 Bit(s), 1Cel, Rectangular, 8 Pin, Surface Mount, 0.150 IN

获取价格

DS1721S-T,R MAXIM 2-Wire Digital Thermometer and Thermostat

获取价格