Quick Start Guide:
1. Connect 3.3V DC power to J4 and ground to J5 from the power supply.
Or, plug the AC/DC power adapter to the DC power Jack
AC/DC power adapter requirement: Output DC 4V~6V, Output current > 800mA
2. Attach two HDMI cables to the HDMI Input and Output Connectors
3. Turn on the DVD/Computer and the Monitor/HDTV.
Adjustment and Control Description
Component
Name
PWR
SD
Function
The LED turns on when 5V DC applies
D1
D2
The LED turns on when the DS16EV5110A does not detect clock signal
Optional DC Power Jack for 1.5 mm Adaptor Plug
3.3V VCC power supply
J3
5V DC
3.3V
J4
J5
GND
GND
J7
FEB
Optional SMBus Control. See Datasheet.
Optional SMBus Control. See Datasheet
J8
CS
J10, J11
SDA, SDC
Optional SMBus access. See Datasheet
Connect “LED” and “SD” to enable D2 function.
Loop Back
Control
Connect “SD” and “EN” to enable look back control function. When the clock
signal is not detected, the DS16EV5110A sets to power down mode.
Turn the switch to control the EQ boost setting. “0” on the switch refers to the
boost setting of “0X00”, “7” on the switch refers to the boost setting of “0X07”.
See datasheet for detail Boost setting information.
J9
U3
Rotary Switch
DS16EV51-AEVKH User Guide Rev A
August, 2008
© National Semiconductor Corporation
3