Datasheet > DS16F95J/883

DS16F95J/883

更新时间： 2024-02-04 14:54:13

品牌	Logo	应用领域
德州仪器 - TI		驱动接口集成电路总线收发器驱动器
页数	文件大小	规格书
20页	631K
描述
EIA-485/EIA-422A 差分总线收发器 \| NAB \| 8 \| -55 to 125

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

DS16F95J/883 技术参数

生命周期：	Active	零件包装代码：	DIP
包装说明：	DIP, DIP8,.3	针数：	8
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.11
Is Samacsys：	N	其他特性：	LG_MAX; SEATED HGT-NOM
差分输出：	YES	驱动器位数：	1
高电平输入电流最大值：	0.00002 A	输入特性：	DIFFERENTIAL SCHMITT TRIGGER
接口集成电路类型：	LINE TRANSCEIVER	接口标准：	EIA-422-A; EIA-485; SCSI-1
JESD-30 代码：	R-GDIP-T8	JESD-609代码：	e0
长度：	10.16 mm	湿度敏感等级：	1
功能数量：	1	端子数量：	8
最高工作温度：	125 °C	最低工作温度：	-55 °C
最小输出摆幅：	1.5 V	输出特性：	3-STATE
最大输出低电流：	0.00002 A	输出极性：	TRUE
封装主体材料：	CERAMIC, GLASS-SEALED	封装代码：	DIP
封装等效代码：	DIP8,.3	封装形状：	RECTANGULAR
封装形式：	IN-LINE	峰值回流温度（摄氏度）：	NOT SPECIFIED
电源：	5 V	认证状态：	Not Qualified
最大接收延迟：	38 ns	接收器位数：	1
筛选级别：	MIL-STD-883	座面最大高度：	5.08 mm
子类别：	Line Driver or Receivers	最大压摆率：	28 mA
最大供电电压：	5.5 V	最小供电电压：	4.5 V
标称供电电压：	5 V	电源电压1-最大：	5.5 V
电源电压1-分钟：	4.5 V	电源电压1-Nom：	5 V
表面贴装：	NO	技术：	BIPOLAR
温度等级：	MILITARY	端子面层：	Tin/Lead (Sn/Pb)
端子形式：	THROUGH-HOLE	端子节距：	2.54 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
最大传输延迟：	25 ns	宽度：	7.62 mm
Base Number Matches：	1

DS16F95J/883 数据手册

DS16F95QML

www.ti.com

SNOSAN0B –SEPTEMBER 2005–REVISED APRIL 2013

DS16F95QML EIA-485/EIA-422A Differential Bus Transceiver

Check for Samples: DS16F95QML

FEATURES

DESCRIPTION

The DS16F95 Differential Bus Transceiver is a

monolithic integrated circuit designed for bidirectional

data communication on balanced multipoint bus

transmission lines. The transceiver meets EIA

standard RS-485 as well as RS-422A.

•

Radiation Ensured 300 krad(Si)

Meets EIA-485 and EIA-422A

Meets SCSI-1 (5 MHZ) Specifications

Designed for Multipoint Transmission

Wide Positive and Negative Input/Output Bus

Voltage Ranges

The DS16F95 offers improved performance due to

the use of state-of-the-art L-FAST bipolar technology.

The L-FAST technology allows for higher speeds and

lower currents by utilizing extremely short gate delay

times. Thus, the DS16F95QML features lower power,

•

Thermal Shutdown Protection

Driver Positive and Negative Current-Limiting

High Impedance Receiver Input

extended

temperature

range

and

improved

specifications.

Receiver Input Hysteresis of 50 mV Typical

Operates from Single 5.0V Supply

Reduced Power Consumption

The DS16F95 combines a TRI-STATE differential line

driver and a differential input line receiver, both of

which operate from a single 5.0V power supply. The

driver and receiver have an active Enable that can be

externally connected to function as a direction control.

The driver differential outputs and the receiver

differential inputs are internally connected to form

differential input/output (I/O) bus ports that are

designed to offer minimum loading to the bus

whenever the driver is disabled or when V_CC= 0V.

These ports feature wide positive and negative

common mode voltage ranges, making the device

suitable for multipoint applications in noisy

environments.

Pin Compatible with DS3695 and SN75176A

The driver is designed to accommodate loads of up to

60 mA of sink or source current and features positive

and negative current limiting in addition to thermal

shutdown for protection from line fault conditions.

The DS16F95 can be used in transmission line

applications employing the DS96F172 and the

DS96F174 quad differential line drivers and the

DS96F173 and DS96F175 quad differential line

receivers.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

12 3 4 5 6 7...20

下载PDF

与DS16F95J/883相关器件

型号	品牌	描述	获取价格	数据表
DS16F95J/NOPB	TI	LINE TRANSCEIVER, CDIP8, CERDIP-8	获取价格
DS16F95JFQML	NSC	EIA-485/EIA-422A Differential Bus Transceiver	获取价格
DS16F95JFQML	TI	LINE TRANSCEIVER, CDIP8, CERDIP-8	获取价格
DS16F95JFQMLV	NSC	EIA-485/EIA-422A Differential Bus Transceiver	获取价格
DS16F95J-MIL	ETC	Transceiver	获取价格
DS16F95J-QMLV	NSC	EIA-485/EIA-422A Differential Bus Transceiver	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

DS16F95J/883

DS16F95J/883 技术参数

DS16F95J/883 数据手册

与DS16F95J/883相关器件

与DS16F95J/883相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DS16F95J/883

DS16F95J/883 技术参数

DS16F95J/883 数据手册

与DS16F95J/883相关器件

与DS16F95J/883相关文章

您还可以找

您在本页遇到什么问题？