Quick Start Guide:
1. Connect 3.3V DC power to J4 and ground to J5 from the power supply.
Or, plug the AC/DC power adapter to the DC power Jack
AC/DC power adapter requirement: Output DC 4V~6V, Output current > 800mA
2. Attach two DVI cables to the DVI Input and Output Connectors
3. Turn on the DVD/Computer and the Monitor/HDTV.
Adjustment and Control Description
Component
Name
PWR
Function
The LED turns on when 5V DC applied
D4
D5
SD
The LED turns on when the DS16EV5110 does not detect clock signal
Optional DC Power Jack for 1.8 mm Adaptor Plug
3.3V VCC power supply
J47
J4
5V DC
3.3V
J5
GND
GND
J10
J9
FEB and GND
CS and VDD
FEB and GND
CS and VDD
Optional SMBus control of U14 (See Datasheet)
Optional SMBus control of U14 (See Datasheet)
Optional SMBus control of U13 (See Datasheet)
Optional SMBus control of U13 (See Datasheet)
J7
J8
J11, J12
SDA, SDC and GND Optional SMBus access (See Datasheet)
Connect “LED” and “SD” to enable D5 function.
Connect “SD” and “EN” to enable look back control function. When the clock
J15
U3
Loop Back Control
signal is not detected, the DS16EV5110A enters power down mode.
Turn the switch to control the EQ boost setting. “0” on the switch refers to the
boost setting of “0X00”, “7” on the switch refers to the boost setting of “0X07”.
See datasheet for detail Boost setting information.
Rotary Switch
Connection in Dual Link Application
D0
D1
D0
D1
D2
DS16EV5110A
D2
CLK
CLK
CS
SD
EN
EN
CS
D3
D4
D5
SD
D3
D4
D5
DS16EV5110A
CLK
CLK
DS16EV51-AEVKD User Guide Rev A
December 2008
3
© National Semiconductor Corporation