DS1345Y/AB
9. Each DS1345 has a built-in switch that disconnects the lithium source until the user first applies VCC.
The expected tDR is defined as accumulative time in the absence of VCC starting from the time power
is first applied by the user. This parameter is assured by component selection, process control, and
design. It is not measured directly during production testing.
10. All AC and DC electrical characteristics are valid over the full operating temperature range. For
commercial products, this range is 0°C to 70°C. For industrial products (IND), this range is -40°C to
+85°C.
11. In a power-down condition the voltage on any pin may not exceed the voltage on VCC.
12. tWR1 and tDH1 are measured from
13. tWR2 and tDH2 are measured from
going high.
going high.
WE
CE
14.
and
are open-drain outputs and cannot source current. External pullup resistors should be
BW
RST
connected to these pins for proper operation. Both pins will sink 10mA.
15. DS1345 modules are recognized by Underwriters Laboratories (UL) under file E99151.
DC TEST CONDITIONS
Outputs Open
Cycle = 200ns for operating current
All voltages are referenced to ground
AC TEST CONDITIONS
Output Load: 100 pF + 1TTL Gate
Input Pulse Levels: 0 – 3.0V
Timing Measurement Reference Levels
Input: 1.5V
Output: 1.5V
Input pulse Rise and Fall Times: 5ns
ORDERING INFORMATION
SUPPLY
TOLERANCE
PART
TEMP RANGE
PIN-PACKAGE
DS1345ABP-70+
DS1345ABP-70IND+
DS1345YP-70+
0°C to +70°C
-40°C to +85°C
0°C to +70°C
-40°C to +85°C
34 PCAP*
34 PCAP*
34 PCAP*
34 PCAP*
5V ± 5%
5V ± 5%
5V ± 10%
5V ± 10%
DS1345YP-70IND+
+Denotes a lead(Pb)-free/RoHS-compliant package.
*DS9034PC+ or DS9034PCI+ (PowerCap) required. Must be ordered separately.
PACKAGE INFORMATION
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note
that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a
different suffix character, but the drawing pertains to the package regardless of RoHS status.
LAND
PACKAGE TYPE
PACKAGE CODE
OUTLINE NO.
21-0246
PATTERN NO.
34 PCAP
PC2+3
—
9 of 10