| DRC SERIES
DIN RAIL MOUNT
Features
• 7.6 Amp AC Semiconductor Motor Controller
• Load voltage range up to 600 VAC
• Fits standard 35mm DIN Rail
• LED input status indicator
• AC or DC control
• Zero Voltage (resistive loads) or instantaneous (inductive loads)
turn-on output
•
C-UL-US Listed, CCC Certified, IEC Rated, CE & RoHS Compliant, Horse-
power Rated
• Built-in Overvoltage Protection
• Ultra-efficient thermal management design (Patented)
Start / Stop
Reversing
ORDERING OPTIONS
Introduction
Solicon DRC3 Series are Solid State Contactors intended
for frequently switching on and off three phase loads up
to 5 HP, 600 VAC 7.6 Amps. They are available in both
contactor versions DRC3P and reversing contactor
versions DRC3R.
DRC
3P
48
D
4
00
R
2
Series
DRC
Function
3P: Contactor
3R: Reversing Contactor
Operating Voltage
The Solicon Contactor DRC3P is available in either
instantaneous turn-on (for Motor Control) or zero voltage
turn-on (for Resistive Loads). It is available in either 2 or
3 controlled leg versions. The 2 legs control version is
particularly suitable for motor control circuits where the
neutral conductor is not utilized.
40: 400 VAC (3R function only)
48: 480 VAC
60: 600 VAC (3P function only)
Control Voltage
A: 208-265 VAC
B: 90-140 VAC
C: 36-55 VAC/DC
D: 18-30 VAC/DC (3P function only)
18-30 VAC (3R function only)
The Solicon Reversing Contactor DRC3R includes an
interlock control that allows only off, forward and
reverse operation in a safe mode while providing high
space saving; it switches instantaneously upon
application of the control voltage unless an
instantaneous change of direction is commanded, then it
will delay the direction change by 100msec in order to
prevent simultaneous forward and reverse operations.
E: 18-30 VDC (3R function only)
Load Current per Phase
4: 7.6 Amp FLA (x2 Controlled Legs & 3R function);
4.8 Amp FLA (x3 Controlled Legs only)
Auxiliary Contacts
N.O. - N.C.
00: Not included
11: 1 Solid State Auxiliary Contact, Normally Open;
1 Solid State Auxiliary Contact, Normally Closed (3P function only)
20: 2 Solid State Auxiliary Contacts, Normally Open
Switching Mode
All the models of Solicon DRC3 Series combine the
benefits and advantages of a solid state contactor with
the functionality and simplicity of use of an
electromechanical contactor thanks to the proprietary
thermal management technology (Patented) and
complete electrical insulation (no grounding required);
the embedded auxiliary contacts, normally open and/or
normally closed, are intended to be used at 18-280VAC.
Five different control voltages are available in order to
cover most applications. All models include overvoltage
protection.
(3P function only)
Blank: Zero Voltage Turn-On
R: Instantaneous Turn-On
Controlled Legs
Required for valid part number
For options only and not
required for valid part number
(3P function only)
Blank: 3 Controlled Legs
2: 2 Controlled Legs
Page 1
Copyright © 2018 Sensata Technologies, Inc.
www.sensata.com