Datasheet > DRB-24V020ABX

DRB-24V020ABX

更新时间： 2022-02-26 13:33:19

品牌	Logo	应用领域
台达 - DELTA		/
页数	文件大小	规格书
11页	1009K
描述
Full corrosion resistant Aluminium chassis

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DRB-24V020ABX 数据手册

TECHNICAL DATASHEET

CliQ II Buffer Module

24V 20A / DRB-24V020AB□

Assembly & Installation

The buffer module can be mounted on 35mm DIN rails in accordance with EN60715. The device should be installed with input / output

terminal block at the top.

Each device is delivered ready to install.

Mounting

Dismounting

Fig. 3.1 Mounting

Fig. 3.2 Dismounting

To uninstall, pull or slide down the latch with screw driver as

shown in Fig 3.2. Then slide the unit in the opposite direction,

release the latch and pull out the unit from the rail.

Snap on the DIN rail as shown in Fig. 3.1:

1. Tilt the unit upwards and insert it onto the DIN rail.

2. Push downwards until stopped.

3. Press against the bottom front side for locking.

4. Shake the unit slightly to ensure that it is secured.

Safety Instructions

–

ALWAYS switch mains of input power OFF before connecting and

disconnecting the input voltage to the unit. If mains are not turned

OFF, there is risk of explosion / severe damage.

To guarantee sufficient convection cooling, keep a distance of

50mm above and below the device as well as a lateral distance of

20mm to other units.

Note that the enclosure of the device can become very hot depending

on the surrounding air temperature and load of the power supply. Risk

of burns!

–

Only plug in and unplug connectors when power is turned off!

DO NOT insert any objects into the unit.

Hazardous voltages may be present for up to 5 minutes after the input

mains voltage is disconnected. Do not touch the unit during this time.

The power supplies unit must be installed in an IP54 enclosure.

The power supplies are built in units and must be installed in a cabinet

or room (condensation free environment and indoor location) that is

relatively free of conductive contaminants.

–

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (October 2013, Rev. 01)

1...4 5 678 9 10 11

中文翻译

下载PDF

与DRB-24V020ABX相关器件

型号	品牌	获取价格	描述	数据表
DRB-25P11	YAMAICHI	获取价格	90° Solder Dip (Male / Female)
DRB-25P12	YAMAICHI	获取价格	90° Solder Dip (Male / Female)
DRB-25S11	YAMAICHI	获取价格	90° Solder Dip (Male / Female)
DRB-25S12	YAMAICHI	获取价格	90° Solder Dip (Male / Female)
DRB30-12-1	RSG	获取价格	15W to 100W Single Output DIN Rail Mount Power Supplies
DRB30-12-1	TDK	获取价格	AC-DC电源
DRB30-24-1	RSG	获取价格	15W to 100W Single Output DIN Rail Mount Power Supplies
DRB30-24-1	TDK	获取价格	AC-DC电源
DRB35H	GXELECTRONICS	获取价格	Rating at 25â Ambient temp. Unless otherwis
DRB35L	GXELECTRONICS	获取价格	Rating at 25â Ambient temp. Unless otherwis