5秒后页面跳转
DR65-0002 PDF预览

DR65-0002

更新时间: 2024-02-07 03:38:40
品牌 Logo 应用领域
泰科 - TE 驱动器二极管衰减器
页数 文件大小 规格书
2页 220K
描述
Linear Driver for PIN Diode Attenuators

DR65-0002 技术参数

是否Rohs认证: 不符合生命周期:Transferred
零件包装代码:SOIC包装说明:SOP,
针数:16Reach Compliance Code:unknown
风险等级:5接口集成电路类型:INTERFACE CIRCUIT
JESD-30 代码:R-PDSO-G16长度:10.3 mm
标称负供电电压:-5 V功能数量:1
端子数量:16最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):NOT SPECIFIED
认证状态:Not Qualified座面最大高度:2.65 mm
最大供电电压:12 V最小供电电压:3 V
标称供电电压:5 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子形式:GULL WING端子节距:1.27 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:7.5 mmBase Number Matches:1

DR65-0002 数据手册

 浏览型号DR65-0002的Datasheet PDF文件第2页 
Linear Driver for PIN Diode  
Attenuators  
V 4.00  
Features  
SOW-16  
n
Linearizes PIN Diode Attenuators Over a Wide  
Attenuation Range  
n
n
n
n
n
n
n
Output Currents up to 12 mA  
Operates with a Single Supply Voltage of +3V to +12V  
Low Quiescent Currents  
Single Control Voltage  
SOW-16, Wide Body Plastic Package  
Test Boards are Available  
Tape and Reel Packaging Available  
Description  
M/A-COM's DR65-0002 is a break point free driver that  
produces a logarithmic output current suitable for  
linearizing PIN diode based shunt attenuators. This driver,  
in conjunction with customer defined external components,  
produces a linear transfer function (dB/V) between the  
input control voltage of the driver and the attenuation  
output of the PIN attenuator. The DR65-0002 has been  
optimized for linearizing M/A-COM’s AT10-0009 or  
AT10-0017 attenuators, but will function well with most  
types of cathode grounded, PIN attenuators. The driver is  
packaged in a SOW-16 package for commercial SMT  
applications. A typical schematic for a 30 dB, 7.5 dB/V  
linear attenuator is shown in Figure 1.  
Package outline conforms to JEDEC standard MS-013AA  
Circuit Description:  
Figure 1  
(Reference Figures 1 and 2)  
The input divider, R1 and the sum of R2 and R3, sets the  
overall transfer function of the circuit. To increase the  
transfer function, decrease the Control Voltage and the  
value of R1. Varying the value of R4 will optimize the  
linearity of the circuit. One can achieve a very linear  
transfer function (<± 1 dB/V) by driving the attenuator over  
a smaller portion of its dynamic range. In the case of the  
AT10-0009 and AT10-0017 attenuators, this would be  
limited to a dynamic range of 28 and 25 dB, respectively.  
Temperature compensation is a function temperature  
coefficient of the thermistor, R3, and the ratio of R2 to R3,  
and can only be optimized once the transfer function and  
linearity component values have been established.  
RFin  
+Vcc  
C1  
.01 µF  
2
1,3,4  
16,14,13  
14  
R1  
4
Vcontrol  
(0 to 4V)  
IN  
DR65-0002  
39K  
ATTENNUATOR  
12  
7
R2  
680  
REF  
5,6,8  
9,11,12  
3
5
R3  
(PTCT)  
10  
330 R4  
360  
RFoutput  
NOTES:  
TRANSFER FUNCTION IS 7.5 dB/V  
Vcontrol IS 0V to 4.0V  
+Vcc IS 5.0V ± 5%  
R3 IS A POSITIVE TEMPERATURE COEFFICIENT THERMISTOR  
ATTENUATOR IS AT10-0009 OR AT10-0017  
SCHEMATIC  
LINEAR ATTENUATOR  

与DR65-0002相关器件

型号 品牌 获取价格 描述 数据表
DR65-0002_1 TE

获取价格

Linear Driver for PIN Diode Attenuators
DR65-0002-TBG TE

获取价格

Voltage Variable Absorptive Attenuator, 800 - 1000 MHz
DR65-0002-TBP TE

获取价格

Voltage Variable Absorptive Attenuator, 1700 - 2000 MHz
DR65-0002TR TE

获取价格

Linear Driver for PIN Diode Attenuators
DR65-0002-TR TE

获取价格

Linear Driver for PIN Diode Attenuators
DR65-0003 TE

获取价格

SPDT PIN Diode Driver
DR65-0003TR TE

获取价格

SPDT PIN Diode Driver
DR65-0003-TR ETC

获取价格

SPDT PIN Diode Driver Up to +/- 50 mA in 25 nS
DR65-0008 TE

获取价格

Quad Positive Voltage Driver for GaAs FET Switches and Attenuators
DR65-0008-TR TE

获取价格

Quad Positive Voltage Driver for GaAs FET Switches and Attenuators