May 2008
DP83849I PHYTER® DUAL Industrial Temperature with Flexible Port Switching
Dual Port 10/100 Mb/s Ethernet Physical Layer Transceiver
Features
General Description
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Low-power 3.3V, 0.18µm CMOS technology
Low power consumption <600mW Typical
3.3V MAC Interface
The number of applications requiring Ethernet Con-
nectivity continues to expand. Along with this
increased market demand is a change in application
requirements. Where single channel Ethernet used to
be sufficient, many applications such as wireless
remote base stations and industrial networking now
require DUAL Port functionality for redundancy or sys-
tem management.
The DP83849I is a highly reliable, feature rich device
perfectly suited for industrial applications enabling
Ethernet on the factory floor. The DP83849I features
two fully independent 10/100 ports for multi-port appli-
cations. NATIONAL’s unique port switching capability
also allows the two ports to be configured to provide
fully integrated range extension, media conversion,
hardware based failover and port monitoring.
The DP83849I provides optimum flexibility in MPU
selection by supporting both MII and RMII interfaces.
In addition this device includes a powerful new diag-
nostics tool to ensure initial network operation and
maintenance.
In addition to the TDR scheme, commonly used for
detecting faults during installation, NATIONAL’s inno-
vative cable diagnostics provides for real time continu-
ous monitoring of the link quality. This allows the
system designer to implement a fault prediction mech-
anism to detect and warn of changing or deteriorating
link conditions.
Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
Flexible MII Port Assignment
Dynamic Integrity Utility
Dynamic Link Quality Monitoring
TDR based Cable Diagnostic and Cable Length Detection
Optimized Latency for Real Time Ethernet Operation
Reference Clock out
RMII Rev. 1.2 Interface (configurable)
SNI Interface (configurable)
MII Serial Management Interface (MDC and MDIO)
IEEE 802.3u MII
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
IEEE 802.3u PCS, 100BASE-TX transceivers and filters
IEEE 1149.1 JTAG
Integrated ANSI X3.263 compliant TP-PMD physical sub-layer
with adaptive equalization and Baseline Wander compensation
Programmable LED support for Link, 10 /100 Mb/s Mode, Activ-
ity, Duplex and Collision Detect
Single register access for complete PHY status
10/100 Mb/s packet BIST (Built in Self Test)
80-pin TQFP package (12mm x 12mm)
•
•
•
•
With the DP83849I, National Semiconductor continues
to build on its Ethernet expertise and leadership posi-
tion by providing a powerful combination of features
and flexibility, easing Ethernet implementation for the
system designer.
Applications
•
•
•
•
•
Medical Instrumentation
Factory Automation
Motor & Motion Control
Wireless Remote Base Station
General Embedded Applications
System Diagram
10BASE-T
or
Port B
MII/RMII/SNI
100BASE-TX
DP83849I
MPU/CPU
10BASE-T
or
Port A
MII/RMII/SNI
100BASE-TX
25 MHz
Clock
Source
Status
LEDs
Typical Application
PHYTER is a registered trademark of National Semiconductor Corporation
© 2008 National Semiconductor Corporation
www.national.com
1