12-ch DI/O, 4-ch AI, 4-ch
RTD Modbus TCP Module
DMU-5010
Features
NEW
Ethernet-based I/O
Mixed I/O in single module
Active I/O message by data stream
Industrial Modbus/TCP protocol
Easily update firmware through Ethernet
Support burn-out detection
Support Ethernet Daisy Chain
Wide operating temperature range
High anti-interference performance
RoHS
COMPLIANT
2002/95/EC
Introduction
DMU-5010 is an Ethernet I/O module that supports Modbus TCP protocol and Ethernet daisy chain. DMU-5010 delivers various onboard I/Os including analog input, digital input,
and digital output, providing flexible options to satisfy versatile application requirements. With high anti-interference performance, DMU-5010 is suitable for harsh environment
applications. You can easily configure the module by the Advantech Domain Focused Configuration Tool.
Specifications
Protection
50/60 Hz Noise rejection
2,500 VDC Isolation
30VDC Overvoltage
General
Enclosure
Mounting
Dimensions (WxHxD)
LAN
Connector
SECC
DIN-rail,Wallmount
43 x 125 x 105 mm (1.69" x 4.92" x 4.13")
10/100Base-T
1x40 Plug-in screw terminal block (#14~22
AWG)(Power and I/O)
2 x RJ-45(LAN)
System (1.6 second) and Communication
(programmable)
Modbus/TCP
Unregulated10-30VDC w/power reversal
protection
Digital Input /Output
Channels:
8-ch DI
4-ch DI/DO shared (DIO0~DIO3 can be set as DI/DO
by Utillity)
Digital Input
Input Level
Watchdog
Dry contact:
Wet contact:
Logic level 0 (Off): open
Logic level 1 (On): close to GND
Logic level 0 (Off): +10V to +30V
Logic level 1(On): +3V max
Supported Protocols
Power Input
Note: The Digital Input Level 0 and 1 status can be
inverted by utility
Supports 200Hz Frequency/counter input
Power Consumption
7.2W@ 24VDC
Analog Input
Channels
Input Type
2 channels max
Counter (32 bit) 200Hz
Frequency 0.1Hz~200Hz
8
mV, V, mA(Ch0-Ch3), mV, V, mA, RTD
(Ch4-Ch7)
0~5V,0~10V, 0~15V, 5V, 10V, 15V, 20mA,
0~20mA, 4~20mA
Supports Digital Noise filter
Input Range
Isolation Protection
2500 VDC
RTD Types & Temp Range
Pt 100 (2-wire and 3-wire):
-50 ~150°C
0 ~ 100°C
Digital Output
Output
Open Collector to 30V
30mA max load.
300mW for each channel
2ms~3600sec
0 ~ 200°C
0 ~ 400°C
-200 ~ 200°C
IEC RTD 100 ohms ( =0.0385 )
JIS RTD 100 ohms ( =0.0392 )
Pt-1000(2-wire and 3-wire): -40°C ~160°C
Voltage: >10MΩ; Current:120Ω
0.1ꢀ, (voltage)ꢁ 0.2ꢀ (current)ꢁ 0.2°C
(RTD) or better
Power Dissipation
PWM Period
PWM Minimum Duty On 0.2ms
Isolation Protection
2500 VDC
Environment
Storage Humidity
Input Impedance
Accuracy
5-95ꢀ RH
Operation Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Temperature -30 ~ 80°C (-22 ~ 176°F)
Span Drift
68 ppm/°C (Voltage)
6 ꢂV/°C (Voltage)
Zero Drift
Resolution
16-bit
Ordering Information
Sampling Rate
Burn-out Detection
10 samples/second
4~20mA and RTD
DMU-5010-AE
8-ch DI. 4-ch DO, 8-ch AI, 4-ch RTD Modbus TCP
Module
Power & Energy Automation
All product specifications are subject to change without notice
Last updated : 25-Mar-2014