DGQ2788A
Vishay Siliconix
www.vishay.com
Automotive 125 °C Analog Switch
Dual DPDT / Quad SPDT, 0.37 , 338 MHz Bandwidth
DESCRIPTION
FEATURES
The DGQ2788A, is a four-channel single-pole double-throw
(SPDT) analog switch with two control inputs. It is also
known as a two-channel double-pole double-throw (DPDT)
configuration. The part is designed to operate from 1.8 V to
5.5 V single power rail. All switches conduct equally well in
both directions, offering rail to rail signal switching and can
be used both as multiplexers as well as de-multiplexers.
• 1.8 V to 5.5 V single supply operation
• Low resistance: 0.37 /typ. at 2.7 V
• Highly flat and matched RON
• Low parasitic capacitance,
CON = 26 pF, COFF = 14.5 pF
• High bandwidth: 338 MHz
• 0.1 ns/typ. propagation delay for rail to rail fast
edge pulsing signal
The DGQ2788A offers low parasitic capacitance and highly
matched low and flat switch resistance over the full signal
range. It features break-before-make switching and low
control logic threshold. The part supports rail to rail fast
edge pulsing signals and have 0.1 ns/typ. propagation
delay. It is ideal for both analog and digital signal switching
in space constrain applications requiring high performance
and efficient use of board space.
• Guaranteed logic high 1.2 V, logic low 0.3 V
• Break before make switching
• Signal swing over V+ capable
• Power down protection
• Latch up current: 300 mA (JESD78)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The DGQ2788A comes in a small miniQFN-16 lead package
of 2.6 mm x 1.8 mm x 0.55 mm.
BENEFITS
This product has been qualified to the Automotive
Electronics Council (AEC) standard Q100 (Grade 1) and is
suitable for use in automotive applications.
• Low and flat resistance
• High bandwidth
• Low parasitic capacitance
• Fault protection
APPLICATIONS
• Automotive infotainment
• Audio, video, and bus routing
• Industrial automation
• Medical imaging
• Network and telecommunication
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
TRUTH TABLE
3xx
LOGIC
NC1, 2, 3 and 4
NO1, 2, 3 and 4
Pin 1
0
1
On
Off
Off
On
Device marking: 3xx
xx = date / lot traceability code
Note: pin 1 has long lead
ORDERING INFORMATION
TEMPERATURE RANGE
PACKAGE
PART NUMBER
MIN. ORDER / PACK. QUANTITY
-40 °C to +125 °C lead (Pb)-free
miniQFN-16
DGQ2788AEN-T1-GE4
Tape and reel, 3000 units
S19-0381-Rev. C, 29-Apr-2019
Document Number: 75683
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000