DG2517E
Vishay Siliconix
www.vishay.com
2.5 , High Bandwidth, Dual SPDT Analog Switch
DESCRIPTION
The DG2517E is low-voltage dual single-pole
double-throw monolithic CMOS analog switches. Designed
to operate from 1.8 V to 5.5 V power supply, the DG2517E
achieves a bandwidth of 221 MHz while providing low
on-resistance (2.5 ), excellent on-resistance matching
(0.3 ) and flatness (1 ) over the entire signal range.
FEATURES
• 1.8 V to 5.5 V single supply operation
• Low RON: 2.5 at 4.5 V
• 221 MHz, -3 dB bandwidth
• Low off-isolation, -58 dB at 1 MHz
• +1.6 V logic compatible
/
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The DG2517E offers the advantage of high linearity that
reduces signal distortion, making ideal for audio, video, and
USB signal routing applications.
BENEFITS
• High linearity
• Low power consumption
• High bandwidth
Built on Vishay Siliconix’s proprietary sub-micron
high-density process, the DG2517E brings low power
consumption at the same time as reduces PCB spacing with
the MSOP10 and DFN10 packages.
• Full rail signal swing range
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product
with the lead (Pb)-free device terminations. The DFN
package has a nickel-palladium-gold device termination
and is represented by the lead (Pb)-free “-GE4” suffix. The
MSOP package uses 100 % matte Tin device termination
and is represented by the lead (Pb)- free “-GE3” suffix. Both
the matte Tin and nickel-palladium-gold device terminations
meet all JEDEC® standards for reflow and MSL ratings.
APPLICATIONS
• USB / UART signal switching
• Audio / video switching
• Cellular phone
• Media players
• Modems
• Hard drives
• PCMCIA
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG2517E
TRUTH TABLE
LOGIC
NC1 AND NC2
NO1 AND NO2
IN1
NO1
GND
NO2
IN2
COM1
NC1
0
1
ON
OFF
ON
1
2
3
4
5
10
9
OFF
V+
8
ORDERING INFORMATION
TEMP. RANGE
NC2
7
PACKAGE
MSOP-10
DFN-10
PART NUMBER
DG2517EDQ-T1-GE3
DG2517EDN-T1-GE4
COM2
6
-40 °C to 85 °C
Top View
ABSOLUTE MAXIMUM RATINGS
PARAMETER
LIMIT
-0.3 to +6
UNIT
Reference to GND
V+
V
IN, COM, NC, NO a
-0.3 to (V+ + 0.3)
Continuous current (any terminal)
Peak current (pulsed at 1 ms, 10 % duty cycle)
Storage temperature (D suffix)
50
200
mA
°C
-65 to +150
320
MSOP-10 c
Power dissipation (packages) b
mW
DFN-10 d
EIA / JESD22-A114-A
EIA / JESD22-C101-A
JESD78
1191
ESD / HBM
ESD / CDM
Latch up
7.5k
V
1.5k
300
mA
Notes
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings
b. All leads welded or soldered to PC board
c. Derate 4 mW/°C above 70 °C
d. Derate 14.9 mW/°C above 70 °C
S17-0460-Rev. A, 03-Apr-17
Document Number: 74518
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000