The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Products Specifications
Current rating Note 1.
AWG#20 to 24 :
3A
2A
26 :
28 :
Operating Temperature Range: -35 to +85ç Note 2.
Storage Temperature Range : -10 to +60ç Note 3.
Storage Moisture Range : -40 to 70% Note 3.
Rating
1A Operating Moisture Range : -40 to 80%
30 : 0.5A
Voltage rating 250VAC
■
UL/C-UL File No. and Recognition No.
C-UL Rating
UL :E52653
C-UL :E52653
AWG#20 to #22 : 3A
AWG#24 to #28 : 1A
Current rating
Voltage rating
Rating
AWG#30
30V AC
: 0.5A
Item
Specification
Condition
Measured at 20mV max. and 1mA
500V DC
1. Contact Resistance
2. Insulation Resistance
3. Withstanding voltage
4. Single Insertor/Extraction Forth
5. Durability (Mating/un-mating)
6. Vibration
30m ohms max.
1000M ohms min.
650V AC/1 minute
No flashover or insulation breakdown.
MIN 0.4N, MAX 4.4N
Measured at the square steel pin with 0.635 0.002
30 cycles
30m ohms max
No electrical discontinuity of 1μs or more
No electrical discontinuity of 1μs or more
30m ohms max
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
2
7. Shock
Acceleration of 490 m/s , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis
8.
Humidity (Steady state)
96 hours at temperature of 40 2ç and humidity of 90ꢀ to 95ꢀ
9. Temperature Cycle
30m ohms max.
(-55ç: 30 minutes-> 5 to 35ç: 5 minutes-> 85ç: 30 minutes-> 5 to 35ç: 5 minutes) 5 cicles
10. Resistance to Soldering heat
Flow: 260ç for 10 seconds
No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Current rating of header is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Product
Part
Material
Polyamide
Polyamide
Brass
Treatment
White
Remarks
UL94V-0
UL94V-0
–––––––
UL94V-0
UL94V-0
–––––––
Socket
Insulator
Insulator
Contact
Insulator
Insulator
Contact
Beige
Header
Tin-lead plated
White
In-line Plug
retainer
Polyamide
Polyamide
Phosphor copper
Black
Crimping contact
Tin plated
B147