Surface-mount ceramic
EMI filter capacitors
X2Y® Series
TESTS AND REQUIREMENTS
Table 4 Test procedures and requirements
IEC 60068-2
IEC 60384-10/
CECC 32 100
CLAUSE
TEST
PROCEDURE
REQUIREMENTS
TEST
METHOD
the capacitors may be mounted
on printed-circuit boards or
ceramic substrates by applying
reflow soldering (including vapor
phase soldering) or conductive
adhesive
4.4
4.5
mounting
no visible damage
visual
inspection
and
dimension
check
any applicable method using ×10
magnification
in accordance with specification
Class 1: ≤1000 pF; f = 1 MHz
>1000 pF; f = 1 kHz NP0:
measuring voltage 1 V at 20 °C
Class 2: For all capacitors f = 1
kHz X7R: measuring voltage 1 V
at 20 °C Y5V: measuring voltage
1 V at 25 °C
4.6.1
4.6.2
capacitance
within specified tolerance
Class 1: ≤1000 pF; f = 1 MHz
>1000 pF; f = 1 kHz NP0:
measuring voltage 1 V at 20 °C
Class 2: For all capacitors f = 1
kHz X7R: measuring voltage 1 V
at 20 °C Y5V: measuring voltage
1 V at 25 °C
tan δ
in accordance with specifications
insulation
resistance
4.6.3
4.6.4
at UR (DC) for 1 minute
in accordance with specification
no breakdown or flashover
voltage proof
2.5 × UR for 1 minute
temperature
characteristic temperature
Between minimum and maximum
4.7.1
in accordance with specification
a force of 5 N applied for 10 s to
the line joining the terminations
and in a plane parallel to the
substrate
4.8
adhesion
no visible damage
In the effort to improve our products, we reserve the right to make changes judged to be necessary.
CONFIDENTIAL AND PROPRIETARY INFORMATION
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or
use without specific written authorization of Pulse is strictly forbidden.
12 of 14
Version 01
Feb-21