www.cellwise-semi.com
CW2017-DS V1.3
CW2017
Fuel Gauge IC with ID Measurement Function
General Description
Features
System-Side or Pack-Side Fuel Gauging
The CW2017 is an ultra-compact, system-side or
pack-side, sensing resistor free, fuel gauging IC for
Lithium-ion(Li+) based batteries in handheld and
portable devices.
±3% Maximum SOC Measurement Error
14-bit Sigma-Delta ADC for Cell Voltage,
Temperature and ID Resistor Measurement
Configurable Interrupt for Battery SOC Change,
High or Low Battery Temperature
The CW2017 tracks the Li+ battery’s operation
conditions and performs state-of-the-art algorithm
to calculate the relative State-of-Charge (SOC) of
very different battery chemistry systems (LiCoOx,
polymer Li-ion, LiMnOx etc.).
No Offset Accumulation During Life Time
No Full-to-Empty Battery Learning Cycle
No Sense Resistor Required
Patented “FastCali” Fuel Gauging Algorithm
External Thermistor or Host Reported
Temperature
The CW2017 includes a 14-bit Sigma-Delta ADC,
a precision voltage reference and build-in NTC
bias circuits. The IC allows users to eliminate the
expensive current sensing resistor which usually
occupies very large PCB area. The IC sends out
the interrupt alarm signal if the battery SOC level
or the temperature that the chip measured or the
host reported reaches the pre-programmed
threshold.
ID Resistor Measurement Supported
Ultra-low Power Consumption
Normal Mode 17A
Sleep Mode 0.6A
General I2C Interface
Tiny, Lead(Pb)-Free, TDFN 2mm x 2mm-8L
Package
The CW2017 integrates the ID resistor sensing
feature. It can also be used as an alternative
sensing port.
Applications
The CW2017 uses a 2-wire I2C compatible serial
interface that operates in standard (100kHz) mode
or fast (400kHz) mode.
Smartphone
Tablet PCs
Handheld and Portable Devices
Lithium-ion or Lithium Polymer Battery Packs
© 2018-2020 Cellwise Microelectronics
1