Date: 9/19/2006
Unit: mm
Part No: CEP-2224
Description: piezo audio indicator
Page No: 2 of 4
Measurement Method
S.P.L. Measuring Circuit
Mic: RION S.P.L. meter UC 30 or equivalent
Mechanical Characteristics
Item
Test Condition
Evaluation Standard
Solderability
Lead terminals are immersed in rosin for
5 seconds and then immersed in solder bath
of +270 ±5°C for 3 ±1 seconds.
90% min. of the lead terminals
will be wet with solder. (Except
the edge of the terminal)
Soldering Heat Resistance
Lead terminals are immersed up to 1.5mm from
buzzer’s body in solder bath of +300±5°C for
3±0.5 seconds or 260±5°C for 10±1 seconds.
For 10 seconds, the force of 9.8N (1.0kg) is
applied to each terminal in axial direction.
The buzzer will be measured after applying
a vibration amplitude of 1.5 mm with 10 to
55 Hz band of vibration frequency to each of
the 3 perpendicular directions for 2 hours.
No interference in operation.
No damage or cutting off.
Terminal Mechanical Strength
Vibration
The value of oscillation
frequency/current consumption
should be ±10% of the initial
measurements. The SPL should
Drop Test
The part will be dropped from a height of 75 cm be within ±10dB compared with
onto a 40 mm thick wooden board 3 times in
3 axis (X, Y, Z) for a total of 9 drops.
the initial measurement.
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062