CDHV 2512
Vishay Techno
High Voltage Chip Divider
FEATURES
• High voltage up to 3000 volts
• Outstanding Stability
• Typical resistance ratios of 250:1, 500:1, etc
• Flow solderable
• Tape & Reel packaging available
• Top and Wraparound termination
• Nickel Barrier available
ELECTRICAL SPECIFICATIONS
Resistance range: 1 MΩ to 20 GΩ
Resistance tolerance: 1 % to 20 %
Power rating: See table
MECHANICAL SPECIFICATIONS
Construction: 96 % alumina substrate with proprietary
cermet resistance element and specified termination
material.
ENVIRONMENTAL SPECIFICATIONS
Operating temperature: - 55 °C to + 150 °C
Voltage coefficient: See table
Temperature coefficient: See table
Ratio tracking: See table
Life: Less than 0.5 % change when tested at full rated power
(Reference only: Not for all values specified. Consult factory for
value.)
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE (OHMS)
POWER RATING (MW)
VOLTAGE RATING (V MAX)
20 M - 20 G
Contact Factory
3000
VOLTAGE & TEMPERATURE COEFFICIENTS OF RESISTANCE CHART TYPICAL
TCR
RESISTANCE (OHMS)
RATIO (TYPICAL)
VCR (PPM/V)
(PPM/°C) - 55 °C to + 150 °C
20 M
150 M
800 M
20 G
250:1
300:1
300:1
700:1
5
5
260
80
10
90
50
160
RATIO TRACKING (PPM/°C)
RESISTANCE (OHMS)
20 M
RATIO (TYPICAL)
COLD (+ 25 °C to - 50 °C)
HOT (+ 25 °C to + 150 °C)
250:1
5
260
150 M
300:1
300:1
700:1
5
80
50
800 M
20 G
10
90
160
*** Contact Factory for other Ratio’s
Document Number: 68020
Revision: 18-Nov-05
www.vishay.com
1