CDB4265
Evaluation Board for CS4265
Features
Description
The CDB4265 evaluation board is an excellent means
for evaluating the CS4265 CODEC. Evaluation requires
an analog/digital signal source and analyzer, and power
supplies. A Windows PC compatible computer must be
used to evaluate the CS4265.
z Single-ended Analog Inputs
z Single-ended Analog Outputs
®
z Coaxial and Optical Connections for CS4265
S/PDIF Transmitter Output
z CS8416 S/PDIF Digital Audio Receiver
System timing for the I²S, Left-Justified and Right-Justi-
fied interface formats can be provided by the CS4265,
the CS8416, or by a PCM I/O stake header with an ex-
ternal source connected.
z Header for Optional External Software
Configuration of CS4265
z Header for External PCM Serial Audio I/O
z 3.3 V Logic Interface
RCA phono jacks are provided for the CS4265 analog in-
puts and outputs. Digital data I/O is available via RCA
phono or optical connectors to the CS8416 and CS4265.
z Pre-defined Software Scripts
®
The Windows software provides a GUI to make config-
z Demonstrates Recommended Layout and
uration of the CDB4265 easy. The software
communicates through the PC’s serial port to configure
the control port registers so that all features of the
CS4265 can be evaluated. The evaluation board may
also be configured to accept external timing and data
signals for operation in a user application during system
development.
Grounding Arrangements
z Windows® Compatible Software Interface
to Configure CS4265 and Inter-board
Connections
ORDERING INFORMATION
CDB4265
Evaluation Board
I
Passive Input Filter
Active Input Filter
Microphone Input
Passive Output Filter
Active Output Filter
M
U
X
CS4265
S/PDIF Output Circuits
Test Points
Control Port Interface
Master Clock
Canned
Oscillator
FPGA
Sub-clocks and Data
CS8416
Header
Cirrus Logic, Inc.
www.cirrus.com
Copyright © Cirrus Logic, Inc. 2005
FEB ‘05
DS657DB1
(All Rights Reserved)