Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
0.1 to 1.6 Newton (10 to 160 gf)
12 and 16 mm
24 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 3 – Maximum Component Rotation
°
ꢁ
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
ꢁypical ꢇocꢈet Centerline
Tape
Maximum
°
°
ꢁ
s
Width (mm) Rotation (
)
ꢂ,ꢃꢄ
ꢃꢅ – ꢄ00
ꢄ0
ꢃ0
ꢀo
Tape
Maximum
°
S
Width (mm) Rotation (
)
ꢂ,ꢃꢄ
ꢃꢅ – 5ꢅ
ꢆꢄ – ꢄ00
ꢄ0
ꢃ0
5
ꢁypical Component Centerline
Ao
Figure 4 – Maximum Lateral Movement
Figure 5 – Bending Radius
ꢂmꢃossed
Carrier
ꢄunched
Carrier
ꢂ mm ꢃ ꢄꢅ mm ꢆape
ꢄꢇ mm ꢆape
0ꢀ5 mm maꢁimum
0ꢀ5 mm maꢁimum
ꢄꢀ0 mm maꢁimum
ꢄꢀ0 mm maꢁimum
ꢀ
ꢁending
ꢀadius
ꢀ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1080_C0G_HV_AUTO_SMD • 12/6/2016 17