Datasheet
LCD Segment Drivers
Multi- function LCD Segment Drivers
BU91501KV-M
MAX 204 Segment(51SEGx4COM)
General Description
Key Specifications
The BU91501KV-M is 1/4 or 1/3-Duty general-purpose
LCD driver that can be used for frequency display in
electronic tuners under the control of a microcontroller.
The BU91501KV-M can drive up to 204 LCD
Segments directly and control up to 4 general-purpose
output ports and up to 30 key input detection.
■
■
■
■
■
■
■
Supply Voltage Range:
2.7V to 6.0V
LCD drive power supply Range:
Operating Temperature Range:
Max Segments:
Display Duty:
Bias:
4.5V to 6.0V
-40°C to +105°C
204 Segments
1/3, 1/4 selectable
1/2, 1/3 selectable
Interface:
3wire serial interface
Features
AEC-Q100 Qualified (Note)
Package
W (Typ.) x D (Typ.) x H (Max.)
Key input function for up to 30 keys (A key scan is
performed only when a key is pressed.)
Either 1/4 or 1/3 duty can be selected
1/4 duty drive:Up to 204 segments
1/3 duty drive:Up to 156 segments
Integrated RAM for display data (DDRAM)
Segment/GPO (Max 4port) output mode selectable
Support standby mode
Integrated Power-on Reset circuit
Integrated Oscillator circuit
No external component
Low power consumption design
(Note) Grade 2
VQFP64
Applications
12.00mm x 12.00mm x 1.60mm
Car Audio, Home Electrical Appliance,
Meter Equipment etc.
Typical Application Circuit
Key Matrix
(P1)
(P2)
(General purpose ports)
(For use control of backlight)
KI1/S48
(P4)
KS1/S42
|
|
+5V
KI5/S52
KS6/S47
VDD
COM1
COM2
COM3
P1/S1
P2/S2
(Note1)
(Note1)
+5.5V
VLCD
P4/S4
S5
LCD Panel
(Up to 204
Segments)
RESB
From
Controller
CSB
SCL
SD
S40
COM4/S41
To Controller
DO
(Note1) Insert capacitors between VDD/VLCD and VSS C≥0.1uF.
Figure 1. Typical Application Circuit
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com
TSZ02201-0P4P0D301120-1-2
8.July.2015 Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
1/30
TSZ22111・14・001