Datasheet
BU7261G BU7261SG BU7262xxx BU7262Sxxx BU7264xx BU7264Sxx
Absolute Maximum Ratings (TA=25℃)
Rating
Parameter
Symbol
Unit
V
BU7261G
BU7262xxx
BU7264xx
Supply Voltage
VDD-VSS
+7
SSOP5
0.54(Note 1,7)
-
-
SOP8
MSOP8
-
-
-
-
0.55(Note 2,7)
0.47(Note 3,7)
0.41(Note 4,7)
-
-
-
Power Dissipation
PD
W
VSON008X2030
SOP14
-
0.45(Note 5,7)
0.70(Note 6,7)
SSOP-B14
Differential Input
Voltage (Note 8)
VID
VDD - VSS
V
Input Common-mode
Voltage Range
VICM
II
(VSS - 0.3) to (VDD + 0.3)
V
mA
V
Input Current (Note 9)
±10
Operating Supply
Voltage
Vopr
+1.8 to +5.5
Operating Temperature
Storage Temperature
Topr
Tstg
-40 to +85
°C
°C
-55 to +125
Maximum Junction
Temperature
TJmax
+125
°C
(Note 1) To use at temperature above TA=25C reduce 5.4mW/°C.
(Note 2) To use at temperature above TA=25C reduce 5.5mW/°C.
(Note 3) To use at temperature above TA=25C reduce 4.7mW/°C.
(Note 4) To use at temperature above TA=25C reduce 4.1mW/°C.
(Note 5) To use at temperature above TA=25C reduce 4.5mW/°C.
(Note 6) To use at temperature above TA=25C reduce 7.0mW/°C.
(Note 7) Mounted on a FR4 glass epoxy PCB 70mm×70mm×1.6mm (Copper foil area less than 3%).
(Note 8) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input pin voltage is set to more than VSS.
(Note 9) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied.
The input current can be set to less than the rated current by adding a limiting resistor.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open
circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case
the IC is operated over the absolute maximum ratings.
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-0RAR0G200230-1-2
18.Apr.2014 Rev.003
4/43