Datasheet
Serial EEPROM Series Standard EEPROM
I2C BUS EEPROM (2-Wire)
BR24G64-3
General Description
BR24G64-3 is a 64Kbit serial EEPROM of I2C BUS interface method
Features
Packages W(Typ) x D(Typ) x H(Max)
Completely conforming to the world standard I2C
BUS.
All controls available by 2 ports of serial clock
(SCL) and serial data (SDA)
Other devices than EEPROM can be connected to
the same port, saving microcontroller port
1.6V to 5.5V Single Power Source Operation most
suitable for battery use
DIP-T8
9.30mm x 6.50mm x 7.10mm
TSSOP-B8
3.00mm x 6.40mm x 1.20mm
1.6V to 5.5V wide limit of operating voltage, possible
FAST MODE 400KHz operation
Up to 32 Byte in Page Write Mode
Bit Format 8K x 8
Self-timed Programming Cycle
Low Current Consumption
SOP8
TSSOP-B8M
3.00mm x 6.40mm x 1.10mm
5.00mm x 6.20mm x 1.71mm
Prevention of Write Mistake
Write (Write Protect) Function added
Prevention of Write Mistake At Low Voltage
More than 1 million write cycles
More than 40 years data retention
Noise filter built in SCL / SDA terminal
Initial delivery state FFh
SOP- J8M
4.90mm x 6.00mm x 1.80mm
TSSOP-B8J
3.00mm x 4.90mm x 1.10mm
SOP- J8
4.90mm x 6.00mm x 1.65mm
MSOP8
2.90mm x 4.00mm x 0.90mm
VSON008X2030
2.00mm x 3.00mm x 0.60mm
SSOP-B8
3.00mm x 6.40mm x 1.35mm
Figure 1.
○Product structure:Silicon monolithic integrated circuit ○This product has no designed protection against radioactive rays
www.rohm.com
TSZ02201-0R2R0G100220-1-2
14.Mar.2016 Rev.006
©2013 ROHM Co., Ltd. All rights reserved.
1/36
TSZ22111・14・001