BQ24013DRCR

更新时间： 2025-11-09 23:16:23

品牌	Logo	应用领域
德州仪器 - TI		/
页数	文件大小	规格书
21页	287K
描述
SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

BQ24013DRCR 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	SON
包装说明：	HVSON, SOLCC10,.11,20	针数：	10
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	0.73
可调阈值：	NO	模拟集成电路 - 其他类型：	POWER SUPPLY SUPPORT CIRCUIT
JESD-30 代码：	S-PDSO-N10	JESD-609代码：	e4
长度：	3 mm	湿度敏感等级：	2
信道数量：	1	功能数量：	1
端子数量：	10	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	HVSON	封装等效代码：	SOLCC10,.11,20
封装形状：	SQUARE	封装形式：	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度（摄氏度）：	260	电源：	3/16.5 V
认证状态：	Not Qualified	座面最大高度：	1 mm
子类别：	Power Management Circuits	最大供电电流 (Isup)：	5 mA
最大供电电压 (Vsup)：	16.5 V	最小供电电压 (Vsup)：	3 V
标称供电电压 (Vsup)：	4.5 V	表面贴装：	YES
温度等级：	INDUSTRIAL	端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：	NO LEAD	端子节距：	0.5 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	3 mm	Base Number Matches：	1

BQ24013DRCR 数据手册

ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢄ ꢆ ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢂ ꢆ ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢇ ꢆ ꢀꢁ ꢂꢃ ꢄꢅ ꢃ

www.ti.com

SLUS530F − SEPTEMBER 2002 − REVISED AUGUST 2005

ꢈꢉꢊ ꢋ ꢌ ꢍꢎ ꢏ ꢐ ꢉ ꢑꢆ ꢌ ꢉꢎ ꢉꢒ ꢊ ꢏ ꢐꢓꢔ ꢋ ꢍ ꢕ ꢓꢊ ꢓꢋ ꢍꢕ ꢍ ꢊꢖ ꢉ ꢏ ꢗꢒ ꢔ

ꢙ

ꢐ

ꢓ

ꢊ

ꢘ

ꢐ

ꢍ

ꢌ

ꢘ

ꢓ

ꢑ

ꢌ

ꢉ

ꢏ

ꢓ

ꢖ

ꢉ

ꢒ

ꢊ

ꢈ

ꢀ

ꢁ

ꢖ

ꢉ

ꢊ

ꢚ

ꢀ

ꢛ

FEATURES

DESCRIPTION

ꢁ

Small 3 mm × 3 mm MLP (QFN) Package

The bqTINYꢀ series are highly integrated Li-Ion and

ꢁ

Ideal for Low-Dropout Designs for Single-Cell

Li−Ion or Li−Pol Packs in Space Limited

Applications

Li-Pol linear charge management devices targeted at

space limited portable applications. The bqTINY

ꢀ

series offer integrated powerFET and current sensor,

reverse blocking protection, high accuracy current and

voltage regulation, charge status, and charge

termination, in a small package.

ꢁ

Integrated Power FET and Current Sensor for

Up to 1-A Charge Applications

Reverse Leakage Protection Prevents Battery

Drainage

The bqTINYꢀ charges the battery in three phases:

conditioning, constant current, and constant voltage.

Charge is terminated based on minimum current. An

internal charge timer provides a backup safety feature

for charge termination. The bqTINYꢀ automatically

re-starts the charge if the battery voltage falls below an

internal threshold. The bqTINYꢀ automatically enters

Integrated Current and Voltage Regulation

0.5% Voltage Regulation Accuracy

Charge Termination by Minimum Current

and Time

ꢁ

Precharge Conditioning With Safety Timer

ꢁ

Status Outputs for LED or System Interface

Indicates Charge and Fault Conditions

sleep mode when V

supply is removed.

In addition to the standard features, different versions

of the bqTINYꢀ offer a multitude of additional features.

These include temperature sensing input for detecting

hot or cold battery packs; power good (PG) output

indicating the presence of valid input power; a

TTL−level charge-enable input (CE) used to disable or

enable the charge process; and a TTL-level timer and

termination enable (TTE) input used to disable or

enable the fast-charge timer and charge termination.

ꢁ

Battery Insertion and Removal Detection

Works With Regulated and Unregulated

Supplies

Short-Circuit Protection

APPLICATIONS

ꢁ

Cellular Phones

PDAs, MP3 Players

Digital Cameras

Internet Appliances

BATTERY

SYSTEM

bq24012DRC

PACK

PACK+

PACK−

OUT 10

AC ADAPTER

VCC

BAT

SYSTEM

INTERFACE

STAT1

STAT2

VSS

SET

ISET

UDG−02106

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments

semiconductor products and disclaimers thereto appears at the end of this data sheet.

bqTINY is a trademark of Texas Instruments Incorporated.

ꢑꢔ ꢒ ꢘꢜ ꢏ ꢖꢉ ꢒꢊ ꢘ ꢓꢖꢓ ꢝꢞ ꢟꢠ ꢡ ꢢꢣ ꢤꢝꢠꢞ ꢝꢥ ꢦꢧ ꢡ ꢡ ꢨꢞꢤ ꢣꢥ ꢠꢟ ꢩꢧꢀ ꢪꢝꢦ ꢣꢤꢝ ꢠꢞ ꢫꢣ ꢤꢨꢬ ꢑꢡ ꢠꢫꢧ ꢦꢤꢥ

ꢦ ꢠꢞ ꢟꢠꢡ ꢢ ꢤꢠ ꢥ ꢩꢨ ꢦ ꢝ ꢟꢝ ꢦ ꢣ ꢤꢝ ꢠꢞꢥ ꢩ ꢨꢡ ꢤꢭꢨ ꢤꢨ ꢡ ꢢꢥ ꢠꢟ ꢖꢨꢮ ꢣꢥ ꢉꢞꢥ ꢤꢡ ꢧꢢ ꢨꢞꢤ ꢥ ꢥꢤ ꢣꢞꢫ ꢣꢡ ꢫ ꢯ ꢣꢡ ꢡ ꢣ ꢞꢤꢰꢬ

ꢑꢡ ꢠ ꢫꢧꢦ ꢤ ꢝꢠ ꢞ ꢩꢡ ꢠ ꢦ ꢨ ꢥ ꢥ ꢝꢞ ꢱ ꢫꢠ ꢨ ꢥ ꢞꢠꢤ ꢞꢨ ꢦꢨ ꢥꢥ ꢣꢡ ꢝꢪ ꢰ ꢝꢞꢦ ꢪꢧꢫ ꢨ ꢤꢨ ꢥꢤꢝ ꢞꢱ ꢠꢟ ꢣꢪ ꢪ ꢩꢣ ꢡ ꢣꢢ ꢨꢤꢨ ꢡ ꢥꢬ

12 3 4 5 6 7...21

中文翻译

下载PDF

BQ24013DRCR 替代型号

型号	品牌	替代类型	描述	数据表
BQ24013DRCRG4	TI	类似代替	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)
BQ24013DRC	TI	功能相似	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)

与BQ24013DRCR相关器件

型号	品牌	获取价格	描述	数据表
BQ24013DRCRG4	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)
BQ24014	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)
BQ24014DRC	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)
BQ24014DRCR	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)
BQ24014DRCRG4	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)
BQ24014DRCT	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR HANDHELD APPLICATIONS (bq TINY)
BQ24014DRCTG4	TI	获取价格	IC,BATTERY MANAGEMENT,LLCC,10PIN,PLASTIC
BQ24018	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR
BQ24018DRCR	TI	获取价格	SINGLE-CHIP, LI-ION CHARGE MANAGEMENT IC FOR
BQ24018DRCRG4	TI	获取价格	1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10, 3 X 3 MM, GREEN, PLASTIC, SON-10

产品中心

服务支持

精选活动

关于我们

帮助中心

BQ24013DRCR

BQ24013DRCR 技术参数

BQ24013DRCR 数据手册

BQ24013DRCR 替代型号

与BQ24013DRCR相关器件

与BQ24013DRCR相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

BQ24013DRCR

BQ24013DRCR 技术参数

BQ24013DRCR 数据手册

BQ24013DRCR 替代型号

与BQ24013DRCR相关器件

与BQ24013DRCR相关文章

您还可以找

您在本页遇到什么问题？