Emboss Tape
LENCONNECTOR
3.0mm pitch/For LED Lamp/Disconnectable Crimp style connectors
Specifications –––––––––––––––––––
• Current rating: 3 A AC, DC (AWG #22)
• Voltage rating: 300 V AC, DC
• Temperature range: -55˚C to +105˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10 mΩ max.
After environmental tests/20 mΩ max.
• Insulation resistance: 1,000 MΩ min.
• Withstanding voltage: 1,700 VAC/minute
• Applicable wire: Conductor size/AWG #26 to #22
Insulation O.D./0.95 to 1.7 mm
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Considering about the luminescence
* Compliant with RoHS.
property of LED package, this LEN
connector is designed as low profile type
connector for LED lighting.
Table of product combinations –––––
Key pattern
A
B
In consideration of connector mating
operation to the LED mounting PCB that
is integrated in the equipment, side-feed
mechanism that provides to enable
mating the connector from above is
adopted, and secure lock that considered
handling and mechanism for preventing
wrong insertion are provided.
Natural
LENR-( )V-S-A(HF)
Natural
Blue
LENR-( )V-E-B(HF)
Blue
Color
Housing
Model No.
Color
• Low profile design
Mounting height at connector mounting side : 3mm
• Secure locking mechanism
Shrouded
header
BM( )B-LENSS-A-TB(HF)
BM( )B-LENES-B-TB(HF)
Model No.
Standards ––––––––––––––––––––––
• Mechanism for preventing wrong insertion
• Halogen-free and RoHS compliant
Recognized E 60389
0
PC board layout and Assembly layout
A±0.05
3±0.03
Connector outline
+0.1
0.9
ꢀ0
9.8
0
0.1
PC board edge
2.35
+0.1
ꢀ0
4.25
Note: 1. The figure on the left side is the figure viewed from the connector mounting side.
Note: 2. Tolerances are non-cumulative: 0.05 mm for all centers.
The dimensions above should serve as a guideline. Contact JST for details.
1