Datasheet
2.7V to 5.5V Input, 4.0A Integrated MOSFET
Single Synchronous Buck DC/DC Converter
BD9B400MUV
General Description
Key Specifications
BD9B400MUV is
a
synchronous buck switching
Input Voltage Range:
2.7V to 5.5V
0.8 V to VPVIN x 0.8 V
4A (Max)
regulator with built-in low on-resistance power MOSFETs.
This IC, which is capable of providing current up to 4A,
features fast transient response by employing constant
on-time control system. It offers high oscillating
frequency at low inductance. With its original constant
on-time control method which operates low consumption
at light load, this product is ideal for equipment and
devices that demand minimal standby power
consumption.
Output Voltage Range:
Maximum Operating Current:
Switching Frequency:
High-Side MOSFET ON Resistance: 30mΩ (Typ)
Low-Side MOSFET ON Resistance: 30mΩ (Typ)
2MHz/1MHz (Typ)
Standby Current:
0μA (Typ)
Package(s)
VQFN016V3030
W (Typ) x D (Typ) x H (Max)
3.00 mm x 3.00 mm x 1.00 mm
Features
Synchronous Single DC/DC Converter
Constant on-time control suitable to Deep-SLLM
Over Current Protection
Short Circuit Protection
Thermal Shutdown Protection
Under Voltage Lockout Protection
Adjustable Soft Start
Power Good Output
VQFN016V3030 Package
(backside heat dissipation)
Applications
VQFN016V3030
Step-down Power Supply for DSPs, FPGAs,
Microprocessors, etc.
Laptop PCs/Tablet PCs/Servers
LCD TVs
Storage Devices (HDDs/SSDs)
Printers, OA Equipment
Entertainment Devices
Distributed Power Supply, Secondary Power Supply
Typical Application Circuit
BD9B400MUV
PGD
VIN
PVIN
AVIN
EN
PGD
BOOT
Enable
0.1µF
0.1µF
1.0µH
22µF
VOUT
SW
FB
AGND
PGND
SS
R1
CFB 22µF×2
MODE
FREQ
CSS
R2
Figure 1. Application Circuit
〇Product structure : Silicon monolithic integrated circuit 〇This product has no designed protection against radioactive rays
.www.rohm.com
TSZ02201-0J3J0AJ01200-1-2
22.Apr.2016 Rev.002
© 2016 ROHM Co., Ltd. All rights reserved.
1/30
TSZ22111 • 14 • 001