Single-chip Type with Built-in FET Switching Regulators
Low Noise High Efficiency
Step-down Switching Regulator
with Built-in Power MOSFET
BD8960NV
No.10027EBT21
●Description
ROHM’s high efficiency step-down switching regulator BD8960NV is a power supply designed to produce a low voltage
including 1 volts from 5.5/3.3 volts power supply line. Offers high efficiency with synchronous rectifier. Employs a current
mode control system to provide faster transient response to sudden change in load.
●Features
1) Offers fast transient response with current mode PWM control system.
2) Offers highly efficiency for all load range with synchronous rectifier (Nch/Pch FET)
3) Incorporates soft-start function.
4) Incorporates thermal protection and ULVO functions.
5) Incorporates short-current protection circuit with time delay function.
6) Incorporates shutdown function
7) Employs small surface mount package : SON008V5060
●Applications
Power supply for LSI including DSP, Micro computer and ASIC
●Line up
Parameter
Symbol
Limits
Unit
1
1
*
*
VCC Voltage
VCC
PVCC
VEN
-0.3~+7
-0.3~+7
V
V
PVCC Voltage
EN Voltage
-0.3~+7
-0.3~+7
V
SW,ITH Voltage
VSW,VITH
Pd1
V
2
Power Dissipation 1
Power Dissipation 2
Operating temperature range
Storage temperature range
Maximum junction temperature
900*
mW
mW
℃
℃
℃
3
Pd2
3900*
Topr
-25 ~ +105
-5 ~ +150
+150
Tstg
Tjmax
*1
*2
*3
Pd should not be exceeded.
Derating in done 7.2mW/℃for temperatures above Ta=25℃, Mounted on 70mm×70mm×1.6mm Glass Epoxy PCB.
Derating in done 31.2mW/℃for temperatures above Ta=25℃, Mounted on JESD51-7.
●Operating Conditions (Ta=25℃)
Limits
Parameter
Symbol
Unit
Min.
2.7 *5
2.7 *5
0
Typ.
Max.
5.5
*4
VCC Voltage
VCC
3.3
V
V
V
A
V
*4
PVCC Voltage
PVCC
3.3
5.5
EN Voltage
VEN
Isw *4
VOUT
-
-
-
VCC
2.0
SW average output current
Output voltage Setting Range
-
1.0
2.5
*4
Pd should not be exceeded.
In case set output voltage 1.6V or more, VccMin. = Vout + 1.3V.
*5
www.rohm.com
2010.04 - Rev.B
1/14
© 2010 ROHM Co., Ltd. All rights reserved.