2-line filters
B84114D
SIFI-D for high insertion loss
Topic
Instructions
Reference chapter
(data book),
paragraph
Protective earth
connection at
operating currents
>250 A
For operating currents greater than 250 A, we Mounting
recommend the PE connection to be set up between instructions, point
the feed (filter: line) and output (filter: load) not via the
PE terminal bolt in the filter housing.
2
Mounting position
Note the mounting position of the filters! It must Mounting
always be ensured that natural convection is not instructions, point
impaired.
13
Long motor cables
Long motor cables cause parasitic currents in the
Mounting
installation. The cable lengths indicated for the output instructions, point
chokes and output filters serve for orientation. The
user must check the technical parameters and
especially the choke temperatures for the respective
application.
15
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the specifications of the
respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 10